Salt Spray Test Chamber LSSC-A12

Salt Spray Test Chamber LSSC-A12


Salt Spray Test Chamber LSSC-A12 is a nichrome heater comprised salt spray test chamber, designed as per ASTMB117, ISO9227 configurations, comes with 410 L of capacity and built-in 20 L salt solution tank with a brine mixing system. Features adjustable Atomizer tower and Spray nozzles spraying system with continuous/periodic spray, covered the entire working space to form a diffuse state. Equipped with PID controller, PT100 Ω / MV A-class sensor and timer, it offers complete recording of spray time with precise temperature and control. Designed with Glass fiber reinforced plastics housing, transparent resin lid and hydrostatic hood seal, it has sample holder of 6 round bars and 5 V-shaped grooves for different tests. With 31 L capacity of saturated air barrel protected against dry burning, this salt spray test chamber also offers protection against humidifier dry-combustion , over-temperature, over-current, water shortage and earth leakage.





Testing room capacity410 L
Temperature rangeAmbient to +60°C
Humidity range95 to 98% RH
Temperature Fluctuation± 0.5 ℃
Temperature Deviation± 2.0 ℃
Spray deposition1 to 2 ml / 80 cm2 .h
Spray typeContinuous /Periodic
Spraying systemAtomizer tower and Spray nozzle
Air preheatingSaturated air barrel; 31 L
Heating elementNichrome heater
Salt fog collectionFog collector and Fog measure cylinder
Standard sample holder8 round bars and 7 V-shaped grooves
ControllerPID
SensorPT100 Ω / MV A-class sensor
HousingGlass fiber reinforced plastics
LidTransparent resin lid
SealingHydrostatic hood seal
ProtectionHumidifier Dry-combustion Protection;
Over-temperature Protection;
Over-current Protection;
Water Shortage Protection;
Earth leakage Protection
Maximum noise65 dBA
Power supply220 V 50 Hz 1 P
Water solution tank dimension (W×D×H)350×180×320 mm
Internal dimension (W×D×H)1100×750×500 mm
External dimension (W×D×H)1900×920×1200 mm
Net weight260 kg
Gross weight310 kg
  •  Nichrome heater comprised salt spray test chamber with 410 L capacity
  •  Designed as per ASTMB117, ISO9227 configurations
  •  Built-in 20 L salt solution tank with a brine mixing system
  •  Adjustable Atomizer tower and Spray nozzles spraying system
  •  Continuous/periodic spray to cover the entire working space to form a diffuse state
  •  PID controller, PT100 Ω / MV A-class sensor and timer
  •  Glass fiber reinforced plastics housing, transparent resin lid and hydrostatic hood seal
  •  Sample holder of 8 round bars and 7 V-shaped grooves for different tests
  •  31 L capacity of saturated air barrel protected against dry burning, for preheating the air
  •  Protection against humidifier dry-combustion , over-temperature, over-current, water shortage and earth leakage
  •  Highly efficient, corrosion resistant with long service life
Salt spray test chamber is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof of painting, coating, electroplating, anodizing and rust-proof of greasing.