Ask An Expert
Labtron LLTT–A13 is manufactured with stainless steel. It has two cooling baths in one chamber which has the same temperature. The instrument is newly designed and made as per ASTM D2386 Standard Test Method for Solidifying Point of Petroleum Oils. It is suitable to determine solidifying point of petroleum products.
| Measurement range | |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | Two holes in one trough, and same temperature |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | 620 x 460 x 355 mm |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | 1000 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It can be widely used in petroleum, chemical industries, research and development laboratories. It is suitable to determine solidifying point of petroleum products.
