Ask An Expert
Website: www.labtron.cc
Email: info@labtron.cc
Labtron LLTT- A15 is manufactured with two cold trough with same temperature. The instrument is designed and made as per ASTM D2386 “Test Methods for Solidifying Point of Petroleum Products”, and ASTM D6371 “Test Methods for Cold Filter Plugging Point of Distillate Fuel
| Measurement range | |
| Temperature controlling accuracy | |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | |
| Inner Dimensions | 560 x 380 x 250 mm |
| Outer Dimensions | 920 x 670 x 510 mm |
| Total power consumption | ≤ 1500 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It can be widely used in petroleum (solidifying point and cold filter plugging point), chemical industries, research and development laboratories.