Ask An Expert
Labtron LLTT-A20 is designed with solidifying point determination. Adopting new type of refrigeration compressor, advanced temperature controller and special refrigeration baths. The instrument is designed and made as per ASTM D2386 “Test Methods for Solidifying Point of Petroleum Products”.
| Measurement range | |
| Temperature controlling accuracy | ± 0.5 °C |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | 730 x 580 x 520 mm |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | ≤ 1000 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It is widely used for oil exploiting, processing and using companies, relative colleges and universities, and R&D institutes. It is also suitable for determining the solidifying point of lubricating oil and dark petroleum products.
