Ask An Expert
Website: www.labtron.cc
Email: info@labtron.cc
Labtron LLTT- A21 is manufactured with new-type compressor, advanced temperature controller and special cooling bath. The instrument is designed and made as per ASTM D2386 “Test Methods for Solidifying Point of Petroleum Products”, and ASTM D6371 “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
| Measurement range | |
| Temperature controlling accuracy | |
| Refrigeration system | New-type refrigeration compressor |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | |
| Inner Dimensions | 560 x 380 x 250 mm |
| Outer Dimensions | 730 x 580 x 520 mm |
| Total power consumption | ≤ 1000 W |
| Heating power | |
| Power supply |
It is widely used in petroleum, chemical and research industry. It is also suitable to determine solidifying point and cold filter plugging point of petroleum products.