Ask An Expert
Website: www.labtron.cc
Email: info@labtron.cc
Our LOFP-A12 Flash point tester is equipped with English man-machine interface. It can preset expected flash point temperature and other parameters which is reasonably designed, safe and convenient to operate. It is designed and made as per ISO 2592, ASTM 92 “Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods).
Thermometer | |
Scale Division | |
Spout Aperture | |
Ambient Temperature | 10 ℃ ~ 40 °C |
Relative Humidity | ≤ 80 % |
Temperature Measurement- Full Scale | Ambient temperature to 300 °C |
Temperature Measurement- Repeatability | ≤ 8 °C |
Temperature Measurement- Reproducibility | ≤ 16 °C |
Temperature Measurement- Resolution | 0.1 °C |
Test accuracy | 0.002 |
Reappearance | |
Graduation | |
Outer Crucible-Material | |
Outer Crucible-Diameter Of Upper Opening | |
Outer Crucible-Height | |
Outer Crucible-Diameter Of Bottom | |
Inner Crucible-Material | |
Inner Crucible-Diameter Of Upper Opening | |
Inner Crucible-Height | |
Inner Crucible-Diameter Of Bottom | |
Inner Crucible-Scale Line | |
Precision | 0.005 |
Gas Tube | |
Flame | 3 to 4 mm |
Heater | |
Heating Power | |
Dimensions | 550 x 470 x 410 mm |
Power Consumption | ≤ 500 W |
Power Supply | AC 220 V ± 10 %, 50 Hz |
=#REF! |
Used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flash point of lower than 79 °C