Ask An Expert
Our LOFP-B10 is deliberately furnished to determine both flash point and fire point. It has a wide range of applications with a great market value. It is designed as per the standard ASTM D92, ISO2592, IP36 (Standard Test Method for Flash Point of Petroleum Products-Cleveland Open Cup Method).
Thermometer | |
Scale Division | |
Spout Aperture | |
Ambient Temperature | 10 ℃ ~ 40 ℃ |
Relative Humidity | ≤ 85 % |
Temperature Measurement- Full Scale | Ambient temperature to ~ 400 ℃ |
Temperature Measurement- Repeatability | ≤ 4 ℃ |
Temperature Measurement- Reproducibility | |
Temperature Measurement- Resolution | |
Test accuracy | 0.005 |
Reappearance | ≤ 8 times |
Graduation | 0.1 ℃ |
Outer Crucible-Material | |
Outer Crucible-Diameter Of Upper Opening | |
Outer Crucible-Height | |
Outer Crucible-Diameter Of Bottom | |
Inner Crucible-Material | |
Inner Crucible-Diameter Of Upper Opening | |
Inner Crucible-Height | |
Inner Crucible-Diameter Of Bottom | |
Inner Crucible-Scale Line | |
Precision | |
Gas Tube | |
Flame | |
Heater | |
Heating Power | |
Dimensions | 620 x 500 x 440 mm |
Power Consumption | 400 W |
Power Supply | AC 220 V ± 10 %, 50 Hz |
=#REF! |
It can be widely used in railway, aviation, electric power, petroleum industry and colleges, scientific research institutes, measurement departments to do determination of flash point and fire point for petroleum products except oil fuel and samples whose open cup flash point is below 79 ℃