Ask An Expert
Manual Lifting Rotary Evaporator LMRE-A20 is 5 L heating bath with a wide temperature ranges from room temperature to 180°C. The speed ranges from 20 to 200 rpm, timing interval operation in clockwise and anticlockwise directions for drying process. Rotary evaporator design is composed of standard set of heating bath, set of glassware, vertical 1000 ml evaporating flask (NS 29/32) and receiving flask (KS 35/20). The manual lift is combined with an auxiliary lift for precise positioning of the glassware. Others like Vacuum pump, Low temperature circulator, Vacuum controller are optional accessories. Designed with LED display to observe speed, temperature and time. It is basic chemical laboratory instrument suitable for evaporation, distillation and separation of chemicals.
| Motor Type | Brushless DC motor |
| Speed Range | 20 to 200 rpm |
| Display | LED (speed, temperature, time) |
| Clockwise and Anti-clockwise | Yes |
| Heating Temperature Range | Room temp. to 180℃ |
| Control Accuracy | Water: ±1℃, Oil: ±3℃ |
| Stroke Displacement | Manual 110 mm + auxiliary 100 mm |
| Interval Time Setting Range | 1 to 999 s |
| Protection Class | IP20 |
| USB Interface | Yes |
| Heating Power | 1200 W |
| Permissible Ambient Temperature | 5 to 40˚C |
| Permissible Relative Humidity | ≤ 80 % RH |
| Dimension | Main Unit: 440 × 320 × 450 mm Heating Bath: 300 × 300 × 240 mm |
| Power Consumption | 1245 W |
| Power Supply | 100 to 120/200 to 240V, 50/60 Hz |
| Weight | Main Unit: 7 kg Heating Bath: 3 kg |
| 1 | Evaporating flask 50 ml NS 29/32 |
|---|---|
| 2 | Evaporating flask 100 ml NS 29/32 |
| 3 | Evaporating flask 250 ml NS 29/32 |
| 4 | Evaporating flask 500 ml NS 29/32 |
| 5 | Chemical resistant vacuum pump |
| 6 | Vacuum controller |
| 7 | Low Temperature Circulator |
Manual Lifting Rotary Evaporator is used for flavor extraction in food industry, solvent removal in separation and recycling chemical / educational / fuel / environmental industry , to determine sample concentration , HPLC and natural product sample preparation , drying down powders (using test tube adapter) and trapping hazardous waste liquid.
