Drug Stability Test Chamber LDST-A20 Catalog

Overview

Drug Stability Test Chamber LDST-A20 designed with 100 L internal capacity volume. It offers 20 to 98 % RH humidity range and temperature ranges from 0℃ to 100℃. Designed to simulate constant climatic conditions for testing a wide variety of pharmaceutical raw Drug material or finished Drug products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.

Features

• - Designed with PID controller system to control main unit, temperature system and Display
  Double layer insulating glass 8 cm thick, made of tempered glass
  Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
  Heat load can absorb 1000 W in -20℃
  Built-in LED light for the working room light which clearly observe samples
  The filter element is suggested to be replaced once a year
  Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
  Designed with PT-100 sensor, real time accurate detection and display of temperature
  Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
  LCD display, which can display test conditions
  Equipped with automatic humidification, which automatically heated by the humidification tank
  High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
  Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
  10 cm thick polyurethane foam and insulation cotton provides better insulation
  Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
  SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
  4 movable castors for ease moving, and with brakes function

Applications :

Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.