Ask An Expert
Falling Weight Impact Tester TFWT-A10 is mainly used to calculate impact resistance of thermoplastic sheets, pipes and plastic fittings under given specified conditions of impact by means of falling weight. It determines anti-impact properties of plastic pipes, sheets and other products. This impact tester is adopted with PLC control & digital touch screen technology for controlling parts like proper figure setup, zero adjustment, preset dropping height, raising & dropping hammer. Adopted with pneumatic technology to prevent secondary impacts with 100 % capture rate.
| Vacuum degree | |
| Accuracy | |
| Resolution | |
| Vacuum chamber effective size | |
| Vacuum chamber size | |
| Gas supply pressure | |
| Measuring range | |
| Precision | |
| Response time | |
| Display precision | |
| Output excursion | |
| Timer accuracy | |
| Temperature | |
| Relative humidity | |
| Working pressure | |
| Input pressure | |
| Temperature range | 10 to 35°C |
| Maximum falling height | 2000 mm |
| Resolution of displacement | 1 mm |
| Height error | < ± 2 mm |
| Hammer mass | 0.25 to 16 kg |
| Noses of strikers | d25 to d90 |
| Dimension | 730×700×3600 mm |
| Power supply | AC 220 V +/- 10 %, 50 Hz single phrase |
| Net weight | 300 kg |
| Gross weight |
Falling Weight Impact Tester is used for impact testing strength of plastic sheets, pipes.
