Ask An Expert
TNRR-A10 is a No rotor rheometer where rubber sample is enclosed in mold cavity, maintained at test temperature. The mold cavity comes in two parts, where lower part (swing oscillations) determines strain as the reaction torque of the mold cavity (force). The PID controlled microprocessor technology controls and detects change in temperature. LCD screen display the real vulcanization curve and temperature curve, adjust the test data, store test results.
Test arm weight | |
Additional Loads | |
Idler | |
Abrasion stroke | |
Horizontal displacement | |
Stroke | |
Grips lateral displacement | |
Idler wheel speed | |
Measurement mode | |
Specimen size | |
Emery cloth specifications | |
Shift screw | |
Limit rotation | |
Set rotation | |
Return form | |
Net Weight | |
Dimension | |
Control temperature range | |
Temperature tester | Room temperature to 200°C |
Temperature display resolution | 0.1°C |
Temperature control accuracy | ≤ ± 0.3°C |
Calibration accuracy | |
Rotor speed | 100 times/ min |
Die cavity frequency | 1.7 Hz |
Sway angle | ± 0.5°, ± 1°, ± 3° |
Air compression | 0.5 MPa to 0.65 MPa |
Ambient temperature | 0 to 35°C |
Test result | Printed date, time, temperature, vulcanization curve, temperature curve ML, MH, ts1, ts2, t10, t50, Vc1, Vc2 |
Display | Windows 7 + software |
Speed accuracy | |
Torque range | 0 to 5 NM, 0 to 10 NM, 0 to 20 NM |
Torque resolution | 0.001 NM |
Printer connection | |
Content printed | |
Product dimension | 1310 × 560 × 620 mm |
Weight | 250 kg |
Power supply | Single phase, 220 V ± 10%, 50 Hz |
No rotor rheometer is used to test vulcanization characteristics of rubber material across rubber industry for quality & research.