Ask An Expert

Deionized Water System LDIN-A10 Catalog

Deionized Water System LDIN-A10

Deionized Water System LDIN-A10

Overview

Deionized Water System LDIN-A10 is smallest and most compact lab water system from tap to ultrapure water, integrating pretreatment, RO, DI, UV, UF and terminal filter into one. Its output ranges from 15 to 30 liters/hour and offers flow rate up to 2 liters/minute (with pressure tank). Features with tap water inlet, it can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 96%, and the deionized water’s resistivity is more than 15 MΩ.cm, near to 18.2 MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water. Designed with apheliotropic LCD display, to detect the quality of deionized or ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. Double wavelength (185 & 254 nm) ultraviolet lamp module, restrain bacteria increase and reduce TOC. It is auto self-flushing of RO membrane function, extend RO membrane life.

Features

  • - Designed with microcomputer controlling system and electronic pressure sensor
    Auto self-flushing of RO membrane function, extend RO membrane life
    Equipped with top cap of pretreatment in the case can be rapidly opened to replace the cartridges without opening the case
    Offers 4 independent ultrapure cartridges
    Ultrapure water quality up to 18.2 MΩ.cm, with the lowest TOC level and running cost
    Whole unit with one time injection molding process
    Material used polypropylene, avoid rusting and keep clean, to meet GLP standard
    Designed with apheliotropic LCD display, to detect the quality of deionized or ultrapure water
    Offers attached portable TDS (total dissolved solid) conductivity test pen, with dry cell design, to detect the quality of feed water and RO water
    Double wavelength (185 & 254 nm) ultraviolet lamp module, restrain bacteria´s increase and reduce TOC
    Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
    Double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic
Specifications
Output30 liters/hour
Flow rateUp to 2 liters/minute (with pressure tank)
Pure water outlet2 reverse osmosis water, deionized water
Deionized Water QualityResistivity: 16 to 18.2 M Ω cm Bacteria: N/A Particle (>0.1 µm): N/A
RO Water QualityIon rejection rate: 97 % to 99% (new RO membrane) Organic rejection rate: >99 %, when MW >200 Dalton Particles and bacteria rejection rate: >99 %
Feed water requirementsTap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2
Dimension410 × 220 × 420 mm 
Power Consumption72 W
Power SupplyAC100 to 240 V, 50/60 Hz
Weightabout 18 kg
Standard configurationMain body (Including 1 set of cartridge) +15 liters pressure tank+ TDS/conductivity test pen
Applications :

Deionized Water System is used in general chemical or biological experiments to obtain deionized and RO water across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Enquiry Now