Ask An Expert
Gas Chromatography LGC-B11 is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.
Suitable for analysis of trace toxic compounds, monitoring and research in environmental protection, atmosphere and water source pollution. It is widely used for petrol-chemistry, environmental protection, epidemic prevention, pharmacology and scientific research.
| Oven | Maximum capacity: 22 L Temperature range: RT + 5 ℃ to 400 ℃ Temperature accuracy: ± 0.1 ℃ Temperature program: 9-phase/ 10 platform Program total time: 9999.9 min Maximum temperature heating rate: 0.1 to 60 ℃/ min Maximum cooling rate: ˂ 10 mins (250 to 50 ℃) |
| Sample injector | Temperature range: RT+ 7 ℃ to 420 ℃ Temperature control: Automatic Injector type: Column or split Maximum sample inlet: 3 pcs Carrier gas flow type: Constant pressure Pre column pressure range: 0 to 400 kPa Pre column pressure accuracy: 0.1 kPa Mobile phase flow range: H2: 0 to 200 ml/min, N2: 0 to 150 ml/min |
| Detector | Temperature range: RT + 7 ℃ to 420 ℃ Maximum installation: Dual detector Flame ignition mode: Automatic Flame Ionization Detector (FID): Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 % |
| Power supply | AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W |
| Oven | Maximum capacity: 22 L Temperature range: RT + 5 ℃ to 400 ℃ Temperature accuracy: ± 0.1 ℃ Temperature program: 9-phase/ 10 platform Program total time: 9999.9 min Maximum temperature heating rate: 0.1 to 60 ℃/ min Maximum cooling rate: ˂ 10 mins (250 to 50 ℃) |
| Sample injector | Temperature range: RT+ 7 ℃ to 420 ℃ Temperature control: Automatic Injector type: Column or split Maximum sample inlet: 3 pcs Carrier gas flow type: Constant pressure Pre column pressure range: 0 to 400 kPa Pre column pressure accuracy: 0.1 kPa Mobile phase flow range: H2: 0 to 200 ml/min, N2: 0 to 150 ml/min |
| Detector | Temperature range: RT + 7 ℃ to 420 ℃ Maximum installation: Dual detector Flame ignition mode: Automatic Flame Ionization Detector (FID): Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 % |
| Power supply | AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W |
| Oven | Maximum capacity: 22 L Temperature range: RT + 5 ℃ to 400 ℃ Temperature accuracy: ± 0.1 ℃ Temperature program: 9-phase/ 10 platform Program total time: 9999.9 min Maximum temperature heating rate: 0.1 to 60 ℃/ min Maximum cooling rate: ˂ 10 mins (250 to 50 ℃) |
| Sample injector | Temperature range: RT+ 7 ℃ to 420 ℃ Temperature control: Automatic Injector type: Column or split Maximum sample inlet: 3 pcs Carrier gas flow type: Constant pressure Pre column pressure range: 0 to 400 kPa Pre column pressure accuracy: 0.1 kPa Mobile phase flow range: H2: 0 to 200 ml/min, N2: 0 to 150 ml/min |
| Detector | Temperature range: RT + 7 ℃ to 420 ℃ Maximum installation: Dual detector Flame ignition mode: Automatic Flame Ionization Detector (FID): Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 % |
| Power supply | AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W |
| Oven | Maximum capacity: 22 L Temperature range: RT + 5 ℃ to 400 ℃ Temperature accuracy: ± 0.1 ℃ Temperature program: 9-phase/ 10 platform Program total time: 9999.9 min Maximum temperature heating rate: 0.1 to 60 ℃/ min Maximum cooling rate: ˂ 10 mins (250 to 50 ℃) |
| Sample injector | Temperature range: RT+ 7 ℃ to 420 ℃ Temperature control: Automatic Injector type: Column or split Maximum sample inlet: 3 pcs Carrier gas flow type: Constant pressure Pre column pressure range: 0 to 400 kPa Pre column pressure accuracy: 0.1 kPa Mobile phase flow range: H2: 0 to 200 ml/min, N2: 0 to 150 ml/min |
| Detector | Temperature range: RT + 7 ℃ to 420 ℃ Maximum installation: Dual detector Flame ignition mode: Automatic Flame Ionization Detector (FID): Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 % |
| Power supply | AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W |
| Oven | Maximum capacity: 22 L Temperature range: RT + 5 ℃ to 400 ℃ Temperature accuracy: ± 0.1 ℃ Temperature program: 9-phase/ 10 platform Program total time: 9999.9 min Maximum temperature heating rate: 0.1 to 60 ℃/ min Maximum cooling rate: ˂ 10 mins (250 to 50 ℃) |
| Sample injector | Temperature range: RT+ 7 ℃ to 420 ℃ Temperature control: Automatic Injector type: Column or split Maximum sample inlet: 3 pcs Carrier gas flow type: Constant pressure Pre column pressure range: 0 to 400 kPa Pre column pressure accuracy: 0.1 kPa Mobile phase flow range: H2: 0 to 200 ml/min, N2: 0 to 150 ml/min |
| Detector | Temperature range: RT + 7 ℃ to 420 ℃ Maximum installation: Dual detector Flame ignition mode: Automatic Flame Ionization Detector (FID): Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 % |
| Power supply | AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W |