Ask An Expert

Handheld C2H4 Ethylene Gas Detector LEGD-A10

Handheld C2H4 Ethylene Gas Detector LEGD-A10 is a portable device with built-in sampling pump having a flow rate of 1 L/min. It meets IP-66 standards which makes it suitable for use in harsh environmental conditions. Rapid speed of sampling, high flow rate, least detection time, compact design, plastic housing, storage space, etc. are some of the features which ensures accurate results in few minutes. It is used in chemical industry, food industry, etc.

Handheld C2H4 Ethylene Gas Detector LEGD-A10

Sampling With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
Gas Ethylene C2H4
Measure Range 0 to 1000 ppm
Resolution 1ppm
Precision 3 to 10% F.S.
Response Time ≤ 10 s
Repeatability ≤ ± 1%
Zero Shift ≤ ± 1%(F.S./year)
Display LCD dot matrix display
Temperature -20°C to 50°C
Humidity 0 to 95 % RH
Degree of Protection IP-66
Alarm Sound, light, vibration
Recovery Time ≤ 10 s
Linearity Error ≤ ± 1%
Gas Unit Units are switchable
Battery 3.6 V 2300 mAh lithium polymer rechargeable battery
operate time is about 12 h continuously
charging time: 4 to 6 h
Operating Time 100 h (pump off)
Dimensions 205×75×32 mm
Weight 300 g

  • Highly precise sensors for accurate detection
    Water-proof, dust-proof, explosion-proof
    Response in less than 30s
    Options for units between ppm and mg/m3
    Automatic calibration mode
    Restore factory setting option
    Audio, visual alarm system
    Threshold values for alarm can be set
    100000 sets can be stored and also re-viewed
    Data transfer through USB (optional)
    Long working hours and rechargeable battery
    Dense plastic housing
    Compact size and easy to use
    Aluminium case to carry the device

It is used to detect ethylene gas. Extensively used in brewing and fermentation industry, cold storage places, agricultural research, chemical labs, paper making industry, bio-pharmaceutical plant etc.

Enquiry Now