Ask An Expert

Disintegration tester LDIT-A10

Disintegration tester LDIT-A10 is adopted with high-precision digital electronic sensor, ensures quality precision and accuracy of the water bath temperature without need for calibration. Equipped with one set of basket to conduct disintegration experiments. The default setting for lifting time of the basket is 15 mins, can manually set the other time value as per the experimental need.

Disintegration tester LDIT-A10

Number of basket lifting set 1 set
Lifting frequency of the basket 30 to 32/ min
Lifting distance of basket 55 ± 1 mm
Minimum spacing from screen to bottom of beaker 25 ± 2 mm
Mesh size 2 mm (as per standard configuration )
Automatic time range 5 to 120 min
Work noise < 60 dB
Temperature prefabrication range Room Temperature to 50°C, display resolution: 0.1 °C
Temperature control accuracy ± 0.3°C
Time prefabrication range 1 to 900 min
Time control accuracy 0.5 min
Accuracy of temperature control 37 ± 0.5°C
Dimension (L × W × H) 260 × 300 × 440 mm
Power supply 220 V/50 Hz
Total power 600 W
Gross Weight 15 kg

  • 1 set of basket with 6 tubes
    Microprocessor controlled automation system
    Even °C temperature maintenance in water bath
    Transparent organic glass for water bath
    Increase and decrease splash proof buttons
    Automatic system for controlling temperature, time, frequency
    Alternative display for the preset and real time data
    Auto-diagnose, auto-alarm system for over-temperature

Used for detection of rate of disintegration of solids such as tablets, capsules, pills in required /set (prescriptive) conditions at pharmaceutical industry.

Enquiry Now