Ask An Expert

Aging Oven TAO-A10
Dimension of the instrument: 850×760×1350 mm
Net weight: 120 kg
Power: 2.5 kW
Power supply: AC 220 V ± 10%, 50 Hz
Vacuum Leak Tester TVLT-A10
Accuracy: 1 % FS
Dimension: 500 × 500 × 700 mm
Gas supply pressure: 0.2 to 0.5 MPa
Gross weight: About 23 kg
Oxygen Index Tester TOIT-A10
Dimension: 360×250×530 mm
Display precision: 0.1 ± 1 %
Input pressure: 0.245 to 0.4 mPa
Measuring range: 0 to 100 % O2
Falling Weight Impact Tester TFWT-A10
Dimension: 730×700×3600 mm
Hammer mass: 0.25 to 16 kg
Height error: < ± 2 mm
Maximum falling height: 2000 mm
Charpy/ Izod Impact Tester TCI-A10
Charpy distance between the clamps: 40 mm, 60 mm, 70 mm, 95 mm
Dimension: 460×330×745 mm
Distance between jaw & impact edge:: 22mm
Impact center distance (Charpy): 221 mm for 1J, 2J, 4J, 5J & 380 mm 7.5J, 15J, 25J
Heat sealer THS-A10
Control accuracy: ± 0.2°C
Dimension (L*B*H): 400×280×380 mm
Dwell pressure: 0.05 to 0.7 MPa
Dwell time: 0.1 S to 999.9 S
Lasting adhesive tester TLAT-A10
Dimension (L*W*H) tester: 320×210×550 mm (3 stations)
Power: AC 220 V, 50 Hz
Standard roller: 2000 ± 50 g
Test plate (L*W*H): 125×50×1.5 mm
Lasting adhesive tester TLAT-A11
Dimension (L*W*H) tester: 650×210×550 mm (6 stations)
Power: AC 220 V, 50 Hz
Standard roller: 2000 ± 50 g
Test plate (L*W*H): 125×50×1.5 mm
Melt flow Indexer TMFI-A10
Accuracy: 0.005
Dimension: 600×400×500 mm
Gross weight: 98 kg
Material canister dimension: Nil
Melt flow Indexer TMFI-A11
Accuracy: 0.005
Dimension: 600×400×500 mm
Gross weight: 110 kg
Material canister dimension: Inside diameter: 9.55 ± 0.025 mm & length: 160 mm
Primary adhesive tester TPAT-A10
Dimension (L*W*H): 320×140×180 mm
Inclined adjustable angle: 0 to 40°
Net weight: 6 kg
Panel width: 120 mm
Vicat softening temperature & HDT machine TVHT-A10
Cooling method: Wind cooling, neutral cooling, fast water cooling
Deformation accuracy: 0.01 mm
Deformation measurement method: Digi gauge
Heating medium: Methyl silicon oil

Enquiry Now