Request Quote
Labtron Logo

Ask An Expert

captcha
Refresh

Drug Stability Test Chamber LDST-A21

Drug Stability Test Chamber LDST-A21 designed with 225 L internal capacity volume. It offers 20 to 98 % RH humidity range and temperature ranges from 0℃ to 100℃. Designed to simulate constant climatic conditions for testing a wide variety of pharmaceutical raw Drug material or finished Drug products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.

Drug Stability Test Chamber LDST-A21

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Temperature Fluctuation ± 0.5 ℃
Humidity Range 20% to 98% RH
Humidity Deviation in time ± 2.5% RH
Cooling Rate 1 ℃ / min
Heating Rate 3 ℃ / min
Cooling system Mechanical compression refrigeration system
Refrigerating unit French TECUMSEH compressor
Refrigerant R404A, R23
Heating Element Nichrome heater
Controller Programmable color LCD touch screen controller Ethernet connection, PC Link
Water supply system Automatic water supply Water purification system
Humidifier External isolation, stainless steel surface evaporation humidifier
Dehumidification Evaporator
Temperature Sensor PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃
Humidity Sensor Dry and wet bulb sensor
Build-in Water Tank 270 × 300 × 400 mm
View Window Size 250 × 280 mm
Air Circulation Centrifugal wind fan
Exterior Material Steel Plate with protective coating
Interior Material SUS304 stainless steel
Thermal Insulation Polyurethane foam and insulation cotton
Observation Window Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration 1 Cable hole (Φ 50,) with plug; 2 shelves
Maximum Noise 65 dBA
Ambient Temperature 5℃ to +35 ℃
Relative Humidity ≤ 85% RH
Internal dimension 500 × 600 × 750 mm
External dimension 960 × 1150 × 1860 mm
Power Supply 220 V, 50 Hz / 380 V, 50 Hz
Net weight 400 kg
Gross weight 440 kg

  • Designed with PID controller system to control main unit, temperature system and Display
    Double layer insulating glass 8 cm thick, made of tempered glass
    Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
    Heat load can absorb 1000 W in -20℃
    Built-in LED light for the working room light which clearly observe samples
    The filter element is suggested to be replaced once a year
    Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
    Designed with PT-100 sensor, real time accurate detection and display of temperature
    Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
    LCD display, which can display test conditions
    Equipped with automatic humidification, which automatically heated by the humidification tank
    High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
    Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
    10 cm thick polyurethane foam and insulation cotton provides better insulation
    Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
    SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
    4 movable castors for ease moving, and with brakes function

Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.

Related To Drug Test Chamber

Drug Stability Test Chamber LDST-A12

Drug Stability Test Chamber LDST-A12

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A11

Drug Stability Test Chamber LDST-A11

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Chamber with Illumination LDST-B10
Drug Stability Chamber with Illumination LDST-B10
Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Chamber with Illumination LDST-B11
Drug Stability Chamber with Illumination LDST-B11
Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Chamber with Illumination LDST-B12

Drug Stability Chamber with Illumination LDST-B12

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A22

Drug Stability Test Chamber LDST-A22

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A20
Drug Stability Test Chamber LDST-A20
Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A10
Drug Stability Test Chamber LDST-A10
Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A24

Drug Stability Test Chamber LDST-A24

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Drug Stability Test Chamber LDST-A23

Drug Stability Test Chamber LDST-A23

Interior Volume 225 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃

Ozone Test Chamber

Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.

Ozone Test Chamber LOC-A11

Ozone Test Chamber LOC-A11

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Ozone Test Chamber LOC-A12

Ozone Test Chamber LOC-A12

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Ozone Test Chamber LOC-A14

Ozone Test Chamber LOC-A14

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Ozone Test Chamber LOC-A13

Ozone Test Chamber LOC-A13

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

Plant Growth Chamber

Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.

Plant Growth Chamber LPGC-A13

Plant Growth Chamber LPGC-A13

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Plant Growth Chamber LPGC-B12

Plant Growth Chamber LPGC-B12

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Plant Growth Chamber LPGC-A10

Plant Growth Chamber LPGC-A10

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Plant Growth Chamber LPGC-B14

Plant Growth Chamber LPGC-B14

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

Salt Spray Test Chamber

Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.

Salt Spray Test Chamber LSSC-A15
Salt Spray Test Chamber LSSC-A15
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Salt Spray Test Chamber LSSC-A12
Salt Spray Test Chamber LSSC-A12
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Salt Spray Test Chamber LSSC-A14
Salt Spray Test Chamber LSSC-A14
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Salt Spray Test Chamber LSSC-A11
Salt Spray Test Chamber LSSC-A11
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

Sand Test Chamber

In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.

Sand and Dust Test Chamber LSC-A11
Sand and Dust Test Chamber LSC-A11
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Sand and Dust Test Chamber LSC-A10
Sand and Dust Test Chamber LSC-A10
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Sand and Dust Test Chamber LSC-A13
Sand and Dust Test Chamber LSC-A13
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Sand and Dust Test Chamber LSC-A12
Sand and Dust Test Chamber LSC-A12
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

Temperature and Humidity Test Chamber

Labtron offers temperature and humidity test chambers which are used in various industries to test large equipments such as automotive parts by controlling the temperature and humidity. It is highly stable and provides enough space to work.

Temperature and Humidity Test Chamber LTHC-B21

Temperature and Humidity Test Chamber LTHC-B21

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Temperature and Humidity Test Chamber LTHC-A11

Temperature and Humidity Test Chamber LTHC-A11

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Temperature and Humidity Test Chamber LTHC-B20

Temperature and Humidity Test Chamber LTHC-B20

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Temperature and Humidity Test Chamber LTHC-A10

Temperature and Humidity Test Chamber LTHC-A10

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

UV Test Chamber

We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.

UV Test Chamber LUVC-A20

UV Test Chamber LUVC-A20

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
UV Test Chamber LUVC-A10

UV Test Chamber LUVC-A10

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
UV Test Chamber LUVC-A21

UV Test Chamber LUVC-A21

Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃

Xenon Test Chamber

We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.

Xenon Test Chamber LXC-A11
Xenon Test Chamber LXC-A11
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Xenon Test Chamber LXC-A21
Xenon Test Chamber LXC-A21
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Xenon Test Chamber LXC-A22
Xenon Test Chamber LXC-A22
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Xenon Test Chamber LXC-A20
Xenon Test Chamber LXC-A20
Interior Volume225 L
Heat load1000 W
Temperature Range0℃ to 100 ℃
Temperature Deviation in time± 2.0 ℃
Enquiry Now