Ask An Expert

Salt Spray Test Chamber LSSC-A11

Salt Spray Test Chamber LSSC-A11 is a nichrome heater comprised salt spray test chamber, designed as per ASTMB117, ISO9227 configurations, comes with 326 L of capacity and built-in 20 L salt solution tank with a brine mixing system. Features adjustable Atomizer tower and Spray nozzles spraying system with continuous/periodic spray, covered the entire working space to form a diffuse state. Equipped with PID controller, PT100 Ω / MV A-class sensor and timer, it offers complete recording of spray time with precise temperature and control. Designed with Glass fiber reinforced plastics housing, transparent resin lid and hydrostatic hood seal, it has 6 round bars and 5 V-shaped grooves for different tests. With 31 L capacity of saturated air barrel protected against dry burning, this salt spray test chamber also offers protection against humidifier dry-combustion , over-temperature, over-current, water shortage and earth leakage.

Salt Spray Test Chamber LSSC-A11

Testing room capacity 326 L
Temperature range Ambient to +60°C
Humidity range 95 to 98% RH
Temperature Fluctuation ± 0.5 ℃
Temperature Deviation ± 2.0 ℃
Spray deposition 1 to 2 ml / 80 cm2 .h
Spray type Continuous /Periodic
Spraying system Atomizer tower and Spray nozzle
Air preheating Saturated air barrel; 31 L
Heating element Nichrome heater
Salt fog collection Fog collector and Fog measure cylinder
Standard sample holder 7 round bars and 6 V-shaped grooves
Controller PID
Sensor PT100 Ω / MV A-class sensor
Housing Glass fiber reinforced plastics
Lid Transparent resin lid
Sealing Hydrostatic hood seal
Protection Humidifier Dry-combustion Protection;
Over-temperature Protection;
Over-current Protection;
Water Shortage Protection;
Earth leakage Protection
Maximum noise 65 dBA
Power supply 220 V 50 Hz 1 P
Water solution tank dimension (W×D×H) 350×180×320 mm
Internal dimension (W×D×H) 1000×640×510 mm
External dimension (W×D×H) 1580×910×1200 mm
Net weight 225 kg
Gross weight 260 kg

  • Nichrome heater comprised salt spray test chamber with 326 L capacity
    Designed as per ASTMB117, ISO9227 configurations
    Built-in 20 L salt solution tank with a brine mixing system
    Adjustable Atomizer tower and Spray nozzles spraying system
    Continuous/periodic spray to cover the entire working space to form a diffuse state
    PID controller, PT100 Ω / MV A-class sensor and timer
    Glass fiber reinforced plastics housing, transparent resin lid and hydrostatic hood seal
    Sample holder of 7 round bars and 6 V-shaped grooves for different tests
    31 L capacity of saturated air barrel protected against dry burning, for preheating the air
    Protection against humidifier dry-combustion , over-temperature, over-current, water shortage and earth leakage
    Highly efficient, corrosion resistant with long service life

Salt spray test chamber is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof of painting, coating, electroplating, anodizing and rust-proof of greasing.

Drug Test Chamber

Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.

Ozone Test Chamber

Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.

Plant Growth Chamber

Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.

Sand Test Chamber

In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.

Temperature and Humidity Test Chamber

Labtron offers temperature and humidity test chambers which are used in various industries to test large equipments such as automotive parts by controlling the temperature and humidity. It is highly stable and provides enough space to work.

UV Test Chamber

We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.

Xenon Test Chamber

We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.

Enquiry Now