Ask An Expert

Crush tester TP-L10

Crush tester TP-L10 is adopted with advanced parts, microprocessor controlled system and multifunctional design to test, translate, adjust, display, remember, and print the test data. User can conduct any test of choice like TCT, FCT, ECT, and PAT for paper and cardboard material by selecting additional, corresponding accessories.

Crush tester TP-L10

Measurement range 5 to 500 N, 50 to 3000 N
Measuring scope
Folding angle
Tensile scope
Folding head suture size
Folding radius
Resolution 1 N
Accuracy ± 1 %
Variability ≤ 1 %
Speed 12.5 ± 2.5 mm/min
Vacuum system volume (ml)
Contact pressure
Vacuum scope
Air volume (50.66 kPa down to 48.00 kPa)
Maximum distance 78 mm
Compression speed
Clamp pressure
Diameter of upper clamp
Diameter of lower clamp
Pneumatic pressure
Film resistance
Dimension 450×400×500 mm
Net weight 75 kg
Power supply AC220 V ± 10 % , 50 Hz

  • Compact structure
    Easy maintenance
    Tests peel strength (PAT) using peel test rack
    Tests Strength of flat compression (FCT) using flat compression sampler
    Tests edge crush test (ECT) using edge crush cutter and auxiliary guide block Tests ring crush test (RCT) using compression plate and special sampler

The crush tester is used to test crush strength of paper & paperboard using different auxiliary appliances across paper & printing, packaging industry.

Enquiry Now