Ask An Expert

Radio Frequency Identification Water Purification System LRFW-B10

Radio Frequency Identification Water Purification System LRFW-B10 is a 30 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO with the least TOC level i.e. < 3 ppb. Here the concentrate or reject stream is fed into a second RO system to maximize water recovery. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Radio Frequency Identification Water Purification System LRFW-B10

Output of Pure water ≥ 10 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Ultrapure water ≥ 1- 1.5 L / min
Resistivity at 25 °C 18.25 M Ω. cm
Conductivity at 25 °C ≤ 5 µs / cm
TOC < 3 ppb
Pyrogens / Endotoxins < 0.025 EU / ml
Bacteria < 1 cfu / ml
Particles ( > 0.22 µm ) < 1 / ml
Absorbance ( 254 nm ) ≤ 0.001
Reactive Silica ( SiO2 ) < 0.01 ppm
Heavy metal < 0.01 ppm
Electrical requirements 220 V / 50 Hz
Power ≥ 150 W
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Weight 45 kg

  • Radio Frequency Identification Chip integrated
    Advanced Double Pass reverse osmosis system for excellent water quality
    2 levels of water purification with high recovery rate
    Online monitoring of water resistance
    Equipped with 30 L water holding tank
    Least TOC level < 3ppb
    Source of inlet water – Tap water
    Benchtop model
    LCD display to monitor the intake of water pressure and various parameters intuitively
    Programmed water shortage protection alarm
    Anti-fouling RO membrane prevention programme
    Ease of cleansing , disinfecting and draining waste water
    Micro filter membrane to filter out pollutants
    Automatic RO membrane antiscale flushing to extend the life of the RO membrane

Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

Enquiry Now