Ask An Expert

Water Purification System LWPS-C10

Water Purification System LWPS-C10 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and ultrapure water. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.

Water Purification System LWPS-C10

Output 2nd stage RO water 90 liters/hour
Output ultrapure water Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
RO Water Quality Conductivity 1st stage RO water: Feed water Conductivity ×5 % Conductivity 2nd stage RO water: 1 to 5 µs/cm
Feed water requirements Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2
Dimension 610 × 585 × 1580 mm 
Power Consumption 480 W
Power Supply AC110 to 240 V, 50/60 Hz
Weight about 75 kg
Standard configuration Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank

  • Water Purification is unique and easy-to-install prefiltration pack system
    Self-maintenance of the reverse osmosis membrane
    The system recirculates water when the system is not in use in order to maintain water quality
    Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
    Designed with graphic display clearly indicates all parameters
    3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
    RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
    Designed with multiple alarm function
    Offers data storage and RS 232/USB communication port
    Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
    Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
    Easy to maintain and operate

Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, medium preparation etc. across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

Enquiry Now