Water Purification System LWPS-C11

Name: Water Purification System LWPS-C11
Brand: Labtron.cc
SKU: LWPS-C11
Rating: 4.9 (672 reviews)

Water Purification System LWPS-C11 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and EDI module, center EDI ultrapure water system. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %
RO Water Quality	Conductivity 1st stage RO water: Feed water Conductivity ×5 % Conductivity 2nd stage RO water: 1 to 5 µs/cm
Feed water requirements	Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2
Dimension	610 × 585 × 1580 mm
Power Consumption	480 W
Power Supply	AC110 to 240 V, 50/60 Hz
Weight	about 75 kg
Standard configuration	Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank

Water Purification is unique and easy-to-install prefiltration pack system
Integrate with EDI module, without softener, chemical regeneration and replacing any DI cartridge
Self-maintenance of the reverse osmosis membrane
The system recirculates water when the system is not in use in order to maintain water quality
Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
Designed with graphic display clearly indicates all parameters
3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
Designed with multiple alarm function
Offers data storage and RS 232/USB communication port
Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
Easy to maintain and operate

Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, medium preparation etc. across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Water Purification System LWPS-C11

Related To Water Purification System (Feed-specific)

Water Purification System LWPS-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Water Purification System LWPS-A11

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Water Purification System LWPS-C10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type I and Type III RO Water Purification System LOTW-A14

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type I and Type III RO Water Purification System LOTW-B12

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type I and Type III RO Water Purification System LOTW-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type I and Type III RO Water Purification System LOTW-B10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Type II Water Purification System LTWP-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type II Water Purification System LTWP-A12

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type II Water Purification System LTWP-B13

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type II Water Purification System LTWP-B12

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Type III Water Purification System LHWP-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type III Water Purification System LHWP-B12

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type III Water Purification System LHWP-A13

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Type III Water Purification System LHWP-C10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Radio Frequency Identification Water Purification System LRFW-A11

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Radio Frequency Identification Water Purification System LRFW-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Radio Frequency Identification Water Purification System LRFW-B11

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Radio Frequency Identification Water Purification System LRFW-B10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

UV Water Purification System LUVW-B14

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

UV Water Purification System LUVW-A13

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

UV Water Purification System LUVW-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

UV Water Purification System LUVW-A11

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Deionized Water System

Deionized Water System LDIN-A20

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %

Deionized Water System LDIN-A10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %