Ask An Expert
Multi-range pocket TDS tester LPTS-A20 comes with 1 - 3 points calibration system. Equipped with platinum sensor provides fast and reliable results. The battery indicator shows the remaining battery capacity on display screen. The System menu allows setting of up to 5 parameters. Equipped with reset features. It can measure TDS content of all liquids and low, mid, high concentration solutions.
Multi-range pocket TDS tester can measure TDS content of solutions, liquids used in electroplating & printing industry, beverage industry, water & waste water, aquarium units.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS range | 0 - 20 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |