Deionized Water System LDIN-A10

Deionized Water System LDIN-A10 is smallest and most compact lab water system from tap to ultrapure water, integrating pretreatment, RO, DI, UV, UF and terminal filter into one. Its output ranges from 15 to 30 liters/hour and offers flow rate up to 2 liters/minute (with pressure tank). Features with tap water inlet, it can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 96%, and the deionized water’s resistivity is more than 15 MΩ.cm, near to 18.2 MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water. Designed with apheliotropic LCD display, to detect the quality of deionized or ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. Double wavelength (185 & 254 nm) ultraviolet lamp module, restrain bacteria increase and reduce TOC. It is auto self-flushing of RO membrane function, extend RO membrane life.

Output	30 liters/hour
Flow rate	Up to 2 liters/minute (with pressure tank)
Pure water outlet	2 reverse osmosis water, deionized water
Deionized Water Quality	Resistivity: 16 to 18.2 M Ω cm Bacteria: N/A Particle (>0.1 µm): N/A
RO Water Quality	Ion rejection rate: 97 % to 99% (new RO membrane) Organic rejection rate: >99 %, when MW >200 Dalton Particles and bacteria rejection rate: >99 %
Feed water requirements	Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm²
Dimension	410 × 220 × 420 mm
Power Consumption	72 W
Power Supply	AC100 to 240 V, 50/60 Hz
Weight	about 18 kg
Standard configuration	Main body (Including 1 set of cartridge) +15 liters pressure tank+ TDS/conductivity test pen

Designed with microcomputer controlling system and electronic pressure sensor
Auto self-flushing of RO membrane function, extend RO membrane life
Equipped with top cap of pretreatment in the case can be rapidly opened to replace the cartridges without opening the case
Offers 4 independent ultrapure cartridges
Ultrapure water quality up to 18.2 MΩ.cm, with the lowest TOC level and running cost
Whole unit with one time injection molding process
Material used polypropylene, avoid rusting and keep clean, to meet GLP standard
Designed with apheliotropic LCD display, to detect the quality of deionized or ultrapure water
Offers attached portable TDS (total dissolved solid) conductivity test pen, with dry cell design, to detect the quality of feed water and RO water
Double wavelength (185 & 254 nm) ultraviolet lamp module, restrain bacteria´s increase and reduce TOC
Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
Double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic

Deionized Water System is used in general chemical or biological experiments to obtain deionized and RO water across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Deionized Water System LDIN-A10

Related to Deionized Water System

Deionized Water System LDIN-A20

Output	30 liters/hour
Flow rate	Up to 2 liters/minute (with pressure tank)
Pure water outlet	2 reverse osmosis water, deionized water
Deionized Water Quality	Resistivity: 16 to 18.2 M Ω cm Bacteria: N/A Particle (>0.1 µm): N/A

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type I and Type III RO Water Purification System LOTW-B10

Output of Pure water	≥ 10 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-B11

Output of Pure water	≥ 20 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-B12

Output of Pure water	≥ 30 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-B13

Output of Pure water	≥ 40 L / hr.
Water Type	Type I and Type III
Water Tank capacity	80 L
Configuration	Floor Standing

Type I and Type III RO Water Purification System LOTW-B14

Output of Pure water	≥ 50 L / hr.
Water Type	Type I and Type III
Water Tank capacity	80 L
Configuration	Floor Standing

Type I and Type III RO Water Purification System LOTW-B20

Water production rate	≥ 30 L/h
Water intake rate	1.5 to 1.8 L/min
Temperature	5 to 40°C
Humidity	10% to 80%

Type I and Type III RO Water Purification System LOTW-A10

Output of Pure water	≥ 10 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-A11

Output of Pure water	≥ 20 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-A12

Output of Pure water	≥ 30 L / hr.
Water Type	Type I and Type III
Water Tank capacity	30 L
Configuration	Benchtop

Type I and Type III RO Water Purification System LOTW-A13

Output of Pure water	≥ 40 L / hr.
Water Type	Type I and Type III
Water Tank capacity	80 L
Configuration	Floor Standing

Type I and Type III RO Water Purification System LOTW-A14

Output of Pure water	≥ 50 L / hr.
Water Type	Type I and Type III
Water Tank capacity	80 L
Configuration	Floor Standing

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Type II Water Purification System LTWP-B10

Output of Pure water	≥ 10 L / hr.
Process	Double Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-B11

Output of Pure water	≥ 20 L / hr.
Process	Double Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-B12

Output of Pure water	≥ 30 L / hr.
Process	Double Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-B13

Output of Pure water	≥ 40 L / hr.
Process	Double Pass RO system
Water Type	Type II
Water Tank capacity	80 L

Type II Water Purification System LTWP-B14

Output of Pure water	≥ 50 L / hr.
Process	Double Pass RO system
Water Type	Type II
Water Tank capacity	80 L

Type II Water Purification System LTWP-A10

Output of Pure water	≥ 10 L / hr.
Process	Single Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-A11

Output of Pure water	≥ 20 L / hr.
Process	Single Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-A12

Output of Pure water	≥ 30 L / hr.
Process	Single Pass RO system
Water Type	Type II
Water Tank capacity	30 L

Type II Water Purification System LTWP-A13

Output of Pure water	≥ 40 L / hr.
Process	Single Pass RO system
Water Type	Type II
Water Tank capacity	80 L

Type II Water Purification System LTWP-A14

Output of Pure water	≥ 50 L / hr.
Process	Single Pass RO system
Water Type	Type II
Water Tank capacity	80 L

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Type III Water Purification System LHWP-B10

Output of Pure water	≥ 10 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Double Pass RO system

Type III Water Purification System LHWP-B11

Output of Pure water	≥ 20 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Double Pass RO system

Type III Water Purification System LHWP-B12

Output of Pure water	≥ 30 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Double Pass RO system

Type III Water Purification System LHWP-B13

Output of Pure water	≥ 40 L / hr.
Water Type	Type III
Configuration	Floor Standing
Process	Double Pass RO system

Type III Water Purification System LHWP-B14

Output of Pure water	≥ 50 L / hr.
Water Type	Type III
Configuration	Floor Standing
Process	Double Pass RO system

Type III Water Purification System LHWP-A10

Output of Pure water	≥ 10 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Single Pass RO system

Type III Water Purification System LHWP-A11

Output of Pure water	≥ 20 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Single Pass RO system

Type III Water Purification System LHWP-A12

Output of Pure water	≥ 30 L / hr.
Water Type	Type III
Configuration	Benchtop
Process	Single Pass RO system

Type III Water Purification System LHWP-A13

Output of Pure water	≥ 40 L / hr.
Water Type	Type III
Configuration	Floor Standing
Process	Single Pass RO system

Type III Water Purification System LHWP-A14

Output of Pure water	≥ 50 L / hr.
Water Type	Type III
Configuration	Floor Standing
Process	Single Pass RO system

Type III Water Purification System LHWP-C10

Output of pure water	≥20 L/h
Water type	III type
Configuration	Desktop
Pressure water tank capacity	24.6 L (approx.)

Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Radio Frequency Identification Water Purification System LRFW-B10

Output of Pure water	≥ 10 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-B11

Output of Pure water	≥ 20 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-B12

Output of Pure water	≥ 30 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-B13

Output of Pure water	≥ 40 L / hr.
Process	Double Pass RO system
Configuration	Floor standing
Water Tank capacity	80 L

Radio Frequency Identification Water Purification System LRFW-B14

Output of Pure water	≥ 50 L / hr.
Process	Double Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

Radio Frequency Identification Water Purification System LRFW-A10

Output of Pure water	≥ 10 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-A11

Output of Pure water	≥ 20 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-A12

Output of Pure water	≥ 30 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

Radio Frequency Identification Water Purification System LRFW-A13

Output of Pure water	≥ 40 L / hr.
Process	Single Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

Radio Frequency Identification Water Purification System LRFW-A14

Output of Pure water	≥ 50 L / hr.
Process	Single Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

Radio Frequency Identification Water Purification System LRFW-C10

Feed Water	Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C
Water Production Rate	≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min
Water Quality (Two Stage)	Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS
Free Chlorine	< 3 ppm

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

UV Water Purification System LUVW-B10

Output of Pure water	≥ 10 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-B11

Output of Pure water	≥ 20 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-B12

Output of Pure water	≥ 30 L / hr.
Process	Double Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-B13

Output of Pure water	≥ 40 L / hr.
Process	Double Pass RO system
Configuration	Floor standing
Water Tank capacity	80 L

UV Water Purification System LUVW-B14

Output of Pure water	≥ 50 L / hr.
Process	Double Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

UV Water Purification System LUVW-A10

Output of Pure water	≥ 10 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-A11

Output of Pure water	≥ 20 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-A12

Output of Pure water	≥ 30 L / hr.
Process	Single Pass RO system
Configuration	Benchtop
Water Tank capacity	30 L

UV Water Purification System LUVW-A13

Output of Pure water	≥ 40 L / hr.
Process	Single Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

UV Water Purification System LUVW-A14

Output of Pure water	≥ 50 L / hr.
Process	Single Pass RO system
Configuration	Floor Standing
Water Tank capacity	80 L

Water Purification System (Feed-specific)

Water Purification System LWPS-A10

Water quality	One stage (Type I)
Feed water	RO water /Distilled water Water temperature: 5 ~ 40℃
Resistivity	18.25 MΩ.cm @ 25 ℃
TOC	< 5ppb

Water Purification System LWPS-A11

Water quality	Two stage(Type III and type I)
Feed water	Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h
Conectivity	<5 μs/cm@25℃
Resistivity	18.25 MΩ.cm @ 25 ℃

Water Purification System LWPS-C10

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: <0.1 cfu/ml Particle (>0.2 µm): <1/ml Endotoxin: <0.001EU/ml RNases: <1pg/ml DNases: <5pg/ml
RO Water Quality	Conductivity 1st stage RO water: Feed water Conductivity ×5 % Conductivity 2nd stage RO water: 1 to 5 µs/cm

Water Purification System LWPS-C11

Output 2nd stage RO water	90 liters/hour
Output ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality	Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: <0.1 cfu/ml Particle (>0.2 µm): <1/ml Endotoxin: <0.001EU/ml RNases: <1pg/ml DNases: <5pg/ml
EDI	Resistivity >10.2 M Ω cm TOC: < 30ppb Silicone rejection rate: >99.9 %