Ask An Expert

Flammability Tester LFLC- A11

Flammability Tester LFLC- A11 is a horizontal and vertical flame chamber with PLC touch screen control panel. The built-in thermocouple calibration and temperature control system maintains high degree of automation. It has automatic ignition and temperature function that display temperature and time. Applicable to the single wire and cable, and soft-line horizontal, vertical combustion test. Adjustable burning time and gas flow that can be automatic / manual, vertical / horizontal switching. Designed according to the relevant provisions of UL1581-2006 1080 (VW -1 combustion test) and 1100 section (horizontal sample/FT2 combustion test) standards. It is convenient to observe and reliable.

Flammability Tester LFLC- A11

Control system PLC touch screen display
Flame angle Adjustable
Flame height 20 to 110 mm/min (adjustable)
Gas supply Methane or prepared gas
Gas flowmeter 1000 ml / min
Gas press Adjustable
Air inlet height 110 mm
Burn time 0 to 999 s (adjustable)
Nozzle diameter 9.5 mm
Nozzle length 1.65 mm
Thermal sensor 10.0 ± 0.05 g and thermocouple electrolytic copper piece
Thermocouple type K type thermocouple (with 0.5 mm diameter stainless steel pipe coating)
Thermocouple diameter 4 mm
Cabinet capacity 4 cubic meter with glass watch door
Interior lamp source LED lamp
Test flame rising temperature 102°C to 103°C in 56 s
After flame time Adjustable
Sample vertical moving distance Same as test standard UL1581
Sample horizontal moving distance Same as test standard UL1581
Test precision 0.01 s
External dimension (W × D × H) 2100 × 1360 × 2200 mm
Power 500 W
Power supply AC 220 V, 50 / 60 Hz
Net weight 300 kg
Gross weight 400 kg

  • PLC touch screen large display
    Control system includes flow meter, combustion reducing valve and u-shaped differential pressure meter
    Test chamber consists of test part and control part
    Main fixture: Test stand and burning torch
    SUS 304 stainless steel stents and vertical point for test support
    Stainless steel coated K type thermocouple
    PID temperature controller with readings up to 1000°C
    Spraying of high anti-corrosion coat on steel seal prevents air flow while testing
    Adjustable flame height and stable flame burner in accordance with ASDM 5025-05
    Enclosure tough glass front door for observation
    Low noise industrial exhaust fan works rapidly, prevents explosion of person to gas completely

It is suitable for testing the flame retardant properties of insulation layer of the cable under abnormal condition such as overheat and overflow.

Enquiry Now