Request Quote
Labtron Logo

Ask An Expert

captcha
Refresh

IR Carbon and Sulphur Analyzer LCSA-A12

IR Carbon and Sulphur Analyzer LCSA-A12 is a unit for determination of sulphur and carbon equipped with two treatment units including a high frequency induction burner and flexible temperature settings with automatic control. With an analysis time of 25 to 60 seconds and 10 to 30 °C, the multi-shielded isolation circuit prevents the machine for high frequency interference. High speed 32-bit sampling improves sensitivity and accuracy.

IR Carbon and Sulphur Analyzer LCSA-A12

Carbon measurement 0.000001 % to 99.99999 %
Sulphur measurement 0.000001 % to 99.99999 %
Sampling per second 32 times
Relative humidity < 80 %
Room temperature 10 ~ 30 °C
Sensitivity 0.1 ppm
Carbon detection pool Can add low carbon pool
Sulphur detection pool Can add high sulphur pool
Analysis time 35 seconds ( can be set 25 to 60 seconds )
Weighing precision 0.0001 g
Power ≥ 2.5 kV
Voltage 220 V
Oscillation frequency 20 MHz
Frequency 18 Hz

  • Ultra-low analysis with double carbon and sulphur ( automated switching )
    32-bit sampling for improved accuracy and sensitivity
    Real time monitoring of carbon and sulphur curve
    Carbon monoxide to dioxide conversion device
    Single and multi-point calibration
    Automatic detection of electromagnetic valves, lifting cylinders
    Auto cleaning and ultra-micro porous metallic dust filter
    High precision pyro electric IR detectors
    Low pressure heating circle for improved sulphur conversion
    High frequency furnace using optical fiber
    Internal pressure conceal , air tightness and filtering
    Statistical data device for counting and online data transfer
    Automated leakage detection ( overflow alarm )
    Automatic storage of carbon and sulphur curves ( 50 each )
    Automatic dust cleaning improves analytical end results
    High pressure ash discharge for thorough cleaning of dust within pipes
    Platinum IR light source for continual heating and high spectral efficiency

Used to measure mass fraction of carbon and sulfur in steel, iron, casting core sand, cement, ore, catalyst, magnetic materials, ceramics, inorganic matter, graphite, refractory materials, battery materials, plants and other materials.

Related To IR Carbon Sulphur Analyzer

IR Carbon and Sulphur Analyzer LCSA-A10

IR Carbon and Sulphur Analyzer LCSA-A10

Carbon measurement 0.000001 % to 99.99999 %
Sulphur measurement 0.000001 % to 99.99999 %
Sampling per second 32 times
Relative humidity < 80 %
IR Carbon and Sulphur Analyzer LCSA-A13

IR Carbon and Sulphur Analyzer LCSA-A13

Carbon measurement 0.000001 % to 99.99999 %
Sulphur measurement 0.000001 % to 99.99999 %
Sampling per second 32 times
Relative humidity < 80 %
IR Carbon and Sulphur Analyzer LCSA-A11
IR Carbon and Sulphur Analyzer LCSA-A11
Carbon measurement 0.000001 % to 99.99999 %
Sulphur measurement 0.000001 % to 99.99999 %
Sampling per second 32 times
Relative humidity < 80 %
Enquiry Now