Ask An Expert

Oil and Grease analyzer LOGA-A10

Oil and Grease analyzer LOGA-A10 is a tabletop unit designed with dismountable integrated optical system and electrical modulation source. It has a sample testing range of 0.12 mg/L to 100 mg/L and measurement limit of 0.12 mg/L. Equipped with self-contained electrical and optical system and lock-in amplifier circuit for signal sensor. Integrated with hard disk to save test data and spectrograms. Features auto reset and regression equation calculation function.

Oil and Grease analyzer LOGA-A10

Measurement Range 0.12 to100 mg/L
Measurement Limit < 0.12 mg/L
Max. Measured Concentration 64000 mg/L
Repeatability ≤1 %
Environmental temperature 5 °C to 35 °C
Environmental humidity 20 % to 80 % RH
Linearity R ≥ 0.999
Wave number range 3400 cm-1 to 2400 cm-1
Absorbance range 0.0000 to 3.000 AU
Power supply 220 V ± 22 V / 50 Hz ± 1 Hz 35 VA
Dimension (L × W × H) 550 × 380 ×150 mm
Weight 15 kg

  • Uses Infrared spectroscopy principle for sample analysis
    Dismountable integrated optical system with good stability and high SNR
    Electrical modulation that reduces the intensity of the heat source to facilitate system cooling
    Sensor signal with lock in amplifier circuit thus improves the analyzer’s SNR
    Can be used as an infrared spectrophotometer
    Carbon tetrachloride can be replaced by tetrachlorethylene extraction agent
    Self-contained optical system and electrical system
    High speed measurement, just takes 30 seconds to finish a test
    Built-in auto reset and regression equation calculation function

Oil and Grease analyzer is widely used to monitor oil content of surface water, ground water, industrial effluent, and oil content of solid.

Enquiry Now