Portable Chlorine Meter LPCL-A10

Portable Chlorine Meter LPCL-A10 is small size designed and developed based on colorimetric method. Designed with LED light source and offers 515 nm wavelength of light. It directly measure residual chlorine, total chlorine and chlorine dioxide in water. It is convenient, accurate and reliable. It offers high-performance low-power single-chip technology, good man-machine interface. Features with Auto-read senses and locks the measurement endpoint. The method is in line with the national standards for determining relevant indicators in the field of water quality analysis.

Residual chlorine/total chlorine	{"Range":"0.00 to 5.00 mg\/L","Accuracy":"0.001 mg\/L 0.001 ABS","Repeatability Lower detection limit":"\u22640.02 mg\/L"}
Chlorine dioxide	{"Range":"0.00 to 10.00 mg\/L","Resolution":"0.001 mg\/L 0.001 ABS","Accuracy":"\u22642 mg\/L: \u00b10.10 mg\/L \u02c32 mg\/L: \u00b15 %","Lower detection limit":"\u22640.04 mg\/L"}
Light source	LED
Wavelength of light	515 nm
Dimension	230 × 86 × 47 mm
Power supply	AA Battery or 5V DC 1A
Weight	0.4 kg

Designed with LED light source and long life, high precision
Wavelength of light is up to 515 nm
Methods are pre-installed with calibration curves built-in
Offers High-performance low-power single-chip technology, good man-machine interface
Calibration is supported up to 1 to 5 points
Auto-read senses and locks the measurement endpoint
Data capacity of up to 200 sets for each testing method (GLP-compliant)
Data stored transferred into the computer by USB communication interface
Equipped with auto-power-off effectively extends the battery usage time
Reset function restore all option to factory default options
Designed with IP65 good waterproof and Dust-proof system

Portable Chlorine Meter used for the determination of residual chlorine, total chlorine and chlorine dioxide in drinking water, landscape water, medical wastewater, swimming pool water and disinfectant solution.

Portable Chlorine Meter LPCL-A10

Related to Portable Chlorine Meter

pH Meter (Benchtop)

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop pH Meter LBPM-B11

Temperature compensation	0 to 100°C, 32°F to 212°F Manual or Automatic
Hold function	Manual or automatic endpoint detection
Stability criteria	Standard or High-accuracy
Interval readings	10, 30, 60 seconds, 10, 30 minutes or Off

Benchtop pH meter LBPM-A11

pH measurement range	0.00 to 14.00 pH
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
Calibration points	2 points

Benchtop pH meter LBPM-A20

pH measurement range	-1.00 to 15.00 pH
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
Calibration points	1-3 points

Benchtop pH meter LBPM-B10

pH measurement range	-2.000 to 20.000 pH
pH accuracy	± 0.002 pH
Calibration points	1-5 points
Calibration solutions	USA, NIST, DIN or user defined

Benchtop Conductivity Meter

Benchtop conductivity meter LBCM-A11

Conductivity measurement range	0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm
Conductivity accuracy	± 1 % F.S.
Conductivity resolution	0.01, 0.1, 1
Conductivity calibration solutions	10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cm

Benchtop Conductivity Meter LBCM-A13

Conductivity measurement range	0.000 μS/cm to 3000mS/cm
Resistivity measurement range	5.00 Ω·cm to 100.0 MΩ·cm
TDS measurement range	0.000 mg/L to 1000g/L
Salinity measurement range	0.00 to 8.00 %

Benchtop Conductivity Meter LBCM-A14

Conductivity Mode	{"Conductivity measurement range":"0.01-20.0, 200.0, 2000 \u00b5S\/cm, 20.00, 200.0 mS\/cm","Conductivity accuracy":"\u00b11% F.S.","Conductivity resolution":"0.001, 0.01, 0.1, 1","Conductivity calibration points":"1 to 3 points","Conductivity calibration solutions":"10 \u00b5S\/cm , 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm"}
TDS Mode	{"TDS measurement Range":"0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS Accuracy":"\u00b1 1 % F.S.","TDS Factor":"0.01 to 1.00 (default 0.5)","TDS Calibration points":"3 points"}
Temperature Mode	{"Temperature range":"0 to 105\u00b0C, 32 to 221\u00b0F","Temperature accuracy":"\u00b11\u00b0C","Temperature resolution":"0.1\u00b0C, 0.1\u00b0F","Temperature calibration points":"1 point","Temperature Compensation Range and Mode":"Manual or Automatic, 0 to 100\u00b0C , 32 to 212\u00b0F","Temperature coefficient":"0.0 to 10.0 % per \u00b0C"}
Cell constant	K=0.1, 1, 10

Benchtop Dissolved Oxygen Meter

Benchtop Dissolved oxygen meter LBDO-A10

Dissolved oxygen range	0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg / L
Resolution	0.1 mg / L
Calibration points	1 - 2 points

Benchtop Dissolved oxygen meter LBDO-A11

Dissolved oxygen range	0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen accuracy	± 0.2 mg / L
Resolution	0.01 mg / L
Calibration points	1 - 2 points

Benchtop Ion Meter

Benchtop Ion meter for Cl, LBIM-A10

Ion measurement range	Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for F, LBIM-A11

Ion measurement range	F range: 1 × 10⁶M – saturation, 0.02 ppm to saturation
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Na, LBIM-A12

Ion measurement range	Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ca, LBIM-A13

Ion measurement range	Ca range: 5 × 10⁷ - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Br, LBIM-A14

Ion measurement range	Br range: 5 × 10⁶ - 1 M, 0.4 - 79900 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

Benchtop Ion meter for NH₄, LBIM-A15

Ion measurement range	NH₄ range: 5 × 10⁶ – 1 M, 0.1 – 18000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

Benchtop Ion meter for NH₃ , LBIM-A20

Ion measurement range	NH₃ range: 1 × 10⁶ - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cn, LBIM-A21

Ion measurement range	Cn range: 5 × 10⁶ – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ag, LBIM-A22

Ion measurement range	Ag range: 1 × 10⁷ - 1 M, 0.01 - 107900 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for K, LBIM-A23

Ion measurement range	K range: 1×10⁶ - 1M, 0.04 -39000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for S, LBIM-A24

Ion measurement range	S range: 1×10⁷ - 1M, 0.003-32100 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Pb, LBIM-A25

Ion measurement range	Pb range: 1×10⁸ – 0.1M, 0.2-20700 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for I, LBIM-A26

Ion measurement range	I range: 1×10⁸- 1M, 0.06 -127000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cu, LBIM-A27

Ion measurement range	Cu range: 1×10⁸ - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cd, LBIM-A28

Ion measurement range	Cd range: 1×10⁶– 1M, 0.01-11200 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Water Hardness Meter

Benchtop Water hardness meter LBWM-A10

Water hardness range	0.05 mmol / L -0.2 mol / L (CaCO₃) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f
Accuracy	± 1 % F.S.
Calibration points	2 to 5 points
Calibration solution	0.001, 0.01, 0.1 mmol/L, 0.001, 0.01, 0.1 mol/L

Conductivity Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket Conductivity tester LPCT-A10

Conductivity measurement range	1.0 to 199.9 µS/cm
Type of conductivity	Low range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

Pocket Conductivity tester LPCT-A11

Conductivity measurement range	10 to 1999 µS/cm
Type of conductivity	Mid-range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

Pocket Conductivity tester LPCT-A12

Conductivity measurement range	0.1 to 19.99 mS/cm
Type of conductivity	High range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

Dissolved Oxygen Tester

Pocket Dissolved oxygen tester LPKDO-A10

Dissolved oxygen range	0.0 to 20.0 mg/L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg/L
% of saturation of oxygen	0.0 to 200.0%
Sensor type	Polarographic dissolved oxygen probe

ORP Tester

Pocket ORP tester LPOT-A10

Sensor type	Platinum sensor
Connector	6 pin
ORP measurement range	(-999) to 999 mV
ORP accuracy	± 2 mV

Pocket ORP tester LPOT-A11

Connector	BNC
ORP measurement range	(-999) to 999 mV
ORP accuracy	± 2 mV
ORP resolution	1 mV

pH Tester

Pocket pH tester LPPT-A10

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A11

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A12

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A21

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A22

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A30

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A31

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A32

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Multi purpose Pocket pH tester LPPT-B10

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Different electrodes can be connceted via BNC Connector
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A20

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Salinity Tester

Pocket Salinity tester LPST-A10

Salinity measurement range	0.00 to 10.00 ppt
Salinity accuracy	± 1 % F.S
Conductivity range	0 - 20.00, 200.0, 2000 µS/cm, 20.00 mS/cm
Calibration solutions	84 µS/cm, 1413 µS/cm, 12.88 mS/cm

Pocket Salinity tester LPST-A11

Salinity measurement range	0.00 to 80.00 ppt
Salinity accuracy	± 1 % F.S
Conductivity range	0 - 200.0 µS/cm, 100 - 2000 µS/cm, 20.00 mS/cm
Calibration solutions	1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm

TDS Tester

Pocket TDS tester LPTS-A10

TDS range	0.5 - 100.0 ppm
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Pocket TDS tester LPTS-A11

TDS range	5 - 1000 ppm
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Pocket TDS tester LPTS-A12

TDS range	0.05 - 10.00 ppt
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Multi-range pocket TDS tester LPTS-A20

TDS range	0 - 20 ppt
TDS accuracy	± 1 % F.S.
TDS factor	0.1 to 1.0 (default 0.5)
Calibration points	1 - 3 points

Portable Dissolve Oxygen Meter

Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.

Portable Dissolved oxygen meter LPRDO-A10

Dissolved oxygen range	0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg / L
Resolution	0.1 mg / L
Calibration points	1 - 2 points

Portable dissolved oxygen meter LPRDO-A11

Dissolved oxygen range	0.0 - 20.0 mg / L (or ppm)
Dissolved oxygen accuracy	± 0.2 mg / L
Resolution	0.01 mg / L
Calibration points	1 - 2 points

Portable Multi Parameter Water Quality Meter

Portable Multi-parameter Water Quality Meter LMPWM-A10

pH mode	{"pH measurement range":"(-2.000) to 20.000 pH","pH accuracy":"\u00b1 0.002 pH","pH calibration points":"1 - 5 points","pH calibration solutions":"USA, NIST, DIN or user defined"}
ORP measurement	{"ORP measurement range":"-1999.9 to 1999.9 mV","ORP accuracy":"\u00b10.2 mV","ORP calibration points":"1 point","ORP calibration solutions":"mV & relative mV"}
Ion measurement	{"Ion measurement range":"0 to 19999 ppm, mg\/L, mol\/L","Ion accuracy":"\u00b1 0.5 % F.S. (monovalent), \u00b1 1 % F.S. (divalent)","Ion calibration points":"2 - 5 points","Ion calibration solutions":"0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol\/L, mg\/L"}
Conductivity measurement	{"Conductivity measurement range":"0 - 20.00, 200.0, 2000 \u00b5S \/ cm, 20.00, 200.2 mS \/ cm","Conductivity accuracy":"\u00b1 0.5 % F.S.","Conductivity calibration points":"1 - 5 points","Conductivity calibration solutions":"10 \u00b5S \/ cm, 84 \u00b5S \/ cm, 1413 \u00b5S \/ cm, 12.88mS \/ cm, 111.8mS \/ cm","Temperature coefficient":"0.0 to 10.0 % \/ \u00b0C","Compensation modes":"Linear or pre water","Cell constant":"K = 0.1, 1, 10 or user-defined","Normalization temperature":"20 \u00b0C or 25 \u00b0C"}

Portable Multi-parameter Water Quality Meter LMPWM-A11

pH mode	{"pH measurement range":"(-2.000) to 20.000 pH","pH accuracy":"\u00b1 0.002 pH","pH calibration points":"1 - 5 points","pH calibration solutions":"USA, NIST, DIN or user defined"}
ORP measurement	{"ORP measurement range":"-1999.9 to 1999.9 mV","ORP accuracy":"\u00b10.2 mV","ORP calibration points":"1 point","ORP calibration solutions":"mV & relative mV"}
Ion measurement	{"Ion measurement range":"","Ion accuracy":"","Ion calibration points":"","Ion calibration solutions":""}
Conductivity measurement	{"Conductivity measurement range":"0 - 20.00, 200.0, 2000 \u00b5S \/ cm, 20.00, 200.2 mS \/ cm","Conductivity accuracy":"\u00b1 0.5 % F.S.","Conductivity calibration points":"1 - 5 points","Conductivity calibration solutions":"10 \u00b5S \/ cm, 84 \u00b5S \/ cm, 1413 \u00b5S \/ cm, 12.88mS \/ cm, 111.8mS \/ cm","Temperature coefficient":"0.0 to 10.0 % \/ \u00b0C","Compensation modes":"Linear or pre water","Cell constant":"K = 0.1, 1, 10 or user-defined","Normalization temperature":"20 \u00b0C or 25 \u00b0C"}

Portable Multi-parameter Water Quality Meter LMPWM-A20

pH mode	{"pH measurement range":"(-2.000) to 20.000 pH","pH accuracy":"\u00b1 0.002 pH","pH calibration points":"1 - 5 points","pH calibration solutions":"USA, NIST, DIN or user defined"}
ORP measurement	{"ORP measurement range":"-1999.9 to 1999.9 mV","ORP accuracy":"\u00b10.2 mV","ORP calibration points":"1 point","ORP calibration solutions":"mV & relative mV"}
Conductivity measurement	{"Conductivity measurement range":"0 - 20.00, 200.0, 2000 \u00b5S \/ cm, 20.00, 200.2 mS \/ cm","Conductivity accuracy":"\u00b1 0.5 % F.S.","Conductivity calibration points":"1 - 5 points","Conductivity calibration solutions":"10 \u00b5S \/ cm, 84 \u00b5S \/ cm, 1413 \u00b5S \/ cm, 12.88mS \/ cm, 111.8mS \/ cm","Temperature coefficient":"0.0 to 10.0 % \/ \u00b0C","Compensation modes":"Linear or pre water","Cell constant":"K = 0.1, 1, 10 or user-defined","Normalization temperature":"20 \u00b0C or 25 \u00b0C"}
TDS measurement	{"TDS range":"0-100 ppt. (max. 200 ppt., depending on factor setting)","TDS accuracy":"\u00b1 1 % F.S.","TDS factor":"0.1 - 1.0 (default 0.5)"}

Portable Multi-parameter Water Quality Meter LMPWM-A21

pH mode	{"pH measurement range":"(-2.000) to 20.000 pH","pH accuracy":"\u00b1 0.002 pH","pH calibration points":"1 - 5 points","pH calibration solutions":"USA, NIST, DIN or user defined"}
ORP measurement	{"ORP measurement range":"-1999.9 to 1999.9 mV","ORP accuracy":"\u00b10.2 mV","ORP calibration points":"1 point","ORP calibration solutions":"mV & relative mV"}
Dissolved oxygen	{"DO concentration range":"0.00 to 20.00 mg\/L","DO accuracy":"\u00b1 0.2 mg\/L","Calibration points":"1 - 2 points","Pressure correction":"60.0 to 112.5 kPa, 450 - 850 mmHg","Salinity correction":"0 to 50 g\/L","% Saturation of Oxygen":"0.0 to 200.0 %","Accuracy":"\u00b1 2.0 %"}
Temperature compensation	0 to 100 °C, 32 to 212 °F, Manual or Automatic

pH Meters (Portable)

Portable pH meter LPRPM-A10

pH range	(-2.00) to 16.00 pH
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
Calibration points	2 points

Portable pH/ORP meter LPRPM-A11

pH range	(-2.00) to 20.00 pH
pH accuracy	± 0.002 pH
pH resolution	0.1, 0.01, 0.001 pH
Calibration points	1 - 5 points

Portable Water Hardness Meters

Portable water hardness meter LPWM-A10

Water hardness range	0.05 mmol / L - 0.2 mol / L (CaCO₃) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f
Accuracy	± 1 % F.S.
Calibration points	2 to 5 points
Calibration solution	0.001, 0.01, 0.1 mmol / L, 0.001, 0.01, 0.1 mol / L

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A10

COD	{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}
Ammonia nitrogen	{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}
Total phosphorous	{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}
Turbidity	{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}

Multi parameter water quality analyzer LMWA-A11

COD	{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}
Ammonia nitrogen	{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}
Total phosphorous	{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}
Turbidity	{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}

Turbidity Meter

Portable turbidity meter LTM-A16

Light source	LED/860 nm (Wavelength)
Readings display	LCD
Unit switches	NTU, FTU, EBC, ASBC
Measurement range	0.00-20.0; 20.01-200; 200.01-1000 NTU

Portable Turbidity Meter LTM-A10

Measuring range (NTU)	0 to 200
Minimum readout value (NTU)	0.1
Calibration point	Nil
Sample volume	5 to 10 ml

Portable Turbidity Meter LTM-A11

Measuring range (NTU)	0 to 100, 0 to 200
Minimum readout value (NTU)	0.01, 0.1
Calibration point	4
Sample volume	5 to 10 ml

Portable Turbidity Meter LTM-A12

Measuring range (NTU)	0 to 100, 100 to 400
Minimum readout value (NTU)	0.01, 0.1
Calibration point	5
Sample volume	5 to 10 ml

Portable Turbidity Meter LTM-A13

Measuring range (NTU)	0 to 100, 100 to 500
Minimum readout value (NTU)	0.01, 0.1
Calibration point	6
Sample volume	5 to 10 ml

Portable Turbidity Meter LTM-A14

Measuring range (NTU)	0 to 100, 100 to 800
Minimum readout value (NTU)	0.01, 0.1
Calibration point	6
Sample volume	5 to 10 ml

Portable Turbidity Meter LTM-A15

Measuring range (NTU)	0 to 100, 100 to 1000
Minimum readout value (NTU)	0.01, 0.1
Calibration point	7
Sample volume	5 to 10 ml

Bench top Turbidity Meter LTM-B10

Measuring range (NTU)	0 to 100
Minimum readout value (NTU)	0.01, 0.1
Calibration point	1
Sample volume	5 to 10 ml

Bench top Turbidity Meter LTM-B11

Measuring range (NTU)	0 to 50, 0 to 100, 0 to 200
Minimum readout value (NTU)	0.01, 0.1
Calibration point	3
Sample volume	5 to 10 ml

Bench top Turbidity Meter LTM-B12

Measuring range (NTU)	0 to 50, 0 to 100, 0 to 200, 0 to 400
Minimum readout value (NTU)	0.01, 0.1
Calibration point	4
Sample volume	5 to 10 ml

Bench top Turbidity Meter LTM-B13

Measuring range (NTU)	0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800
Minimum readout value (NTU)	0.01, 0.1
Calibration point	5
Sample volume	5 to 10 ml

Bench top Turbidity Meter LTM-B14

Measuring range (NTU)	0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800, 0 to 1000
Minimum readout value (NTU)	0.01, 0.1
Calibration point	6
Sample volume	5 to 10 ml

Bench top Turbidity Meter (with built-in printer) LTM-C10

Measuring range (NTU)	0 to 100, 0 to 200
Minimum readout value (NTU)	0.01
Calibration point	2
Sample volume	18 to 20 ml

Bench top Turbidity Meter (with built-in printer) LTM-C11

Measuring range (NTU)	0 to 100, 0 to 200, 0 to 500
Minimum readout value (NTU)	0.01
Calibration point	3
Sample volume	18 to 20 ml

Bench top Turbidity Meter (with built-in printer) LTM-C12

Measuring range (NTU)	0 to 10, 0 to 100, 0 to 200, 0 to 500
Minimum readout value (NTU)	0.001
Calibration point	4
Sample volume	18 to 20 ml

Bench top Turbidity Meter (with built-in printer) LTM-C13

Measuring range (NTU)	0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000
Minimum readout value (NTU)	0.01
Calibration point	5
Sample volume	18 to 20 ml

Bench top Turbidity Meter (with built-in printer) LTM-C14

Measuring range (NTU)	0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000
Minimum readout value (NTU)	0.001
Calibration point	5
Sample volume	18 to 20 ml

Bench top Turbidity Meter (with built-in printer) LTM-C15

Measuring range (NTU)	0 to 10, 0 to 100
Minimum readout value (NTU)	0.001
Calibration point	2
Sample volume	18 to 20 ml

Online pH Controller

Online pH Controller LOPC-A10

pH measurement range	01.00 to 15.00 pH
pH calibration points	1 to 3 points
pH Buffer Solutions	USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18)
pH accuracy	± 0.01 pH

Online Dissolved Oxygen Controller

Online Dissolved Oxygen Controller LODC-A10

Dissolved oxygen range	0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen Calibration points	1 - 2 points
Dissolved oxygen accuracy	± 0.5 mg / L
Dissolved oxygen resolution	0.1 mg / L

Online Conductivity Controller

Online Conductivity Controller LOCC-A10

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Conductivity calibration points	1 to 3 points
Conductivity accuracy	±1 % F.S.
Conductivity resolution	0.001/ 0.01/ 0.1/ 1

TSS Meter

TSS Meter LTSS-A10

Measurement range	20000 mg/L 0.01 mg/L ~ 45000 mg/L 0.01 mg/L ~ 120000 mg/L
Measurement accuracy	± 2 % F.S. of its range ( Depending on the homogeneity of sludge)
Pressure range	≤ 0.4 Mpa
Flow rate	≤ 2.5 m/s, 8.2 ft./s

Benchtop Multi-parameter Water Quality Meter

Benchtop Multi-parameter Water Quality Meter LMPWM-A30

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

TDS Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

Benchtop Multi-parameter Water Quality Meter LMPWM-A31

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

TDS Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

Benchtop Multi-parameter Water Quality Meter LMPWM-A32

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Dissolved Oxygen Mode

Dissolved Oxygen Range	0.00 to 20.00 mg/ L
Dissolved Oxygen Accuracy	± 0.2 mg/ L
Dissolved Oxygen Resolution	0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points	1 or 2 Points
% Saturation Range	0.0 to 200.0 % with ± 2 % accuracy
Pressure correction	60 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 to 50 g/ L

Benchtop Multi-parameter Water Quality Meter LMPWM-A40

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

ORP Mode

mV Range	± 2000 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1 mV, selectable
mV Calibration Points	1 Point, only for relative mode

Ion Mode

Ion measurement range	0.01 to 30000 ppm, mg/l, mol/l, mmol/l (refer Range of ion selection)
Ion measurement accuracy	±0.5% F.S (Monovalent), ±1% F.S (Divalent)
Ion measurement resolution	0.001/0.01/0.1/1
Ion measurement calibration points	2 to 5 points
Ion measurement calibration solutions	0.001/0.01/0.1/1/10/100/1000/10000 ppm, mg/L, mol/L
Ion measurement methods	Direct reading, Known addition, Known subtraction, Sample addition, Sample subtraction

Water Hardness Mode

Water hardness measurement range	0.05-200mmol/L, 0-1120°dH, 0-1404°e, 0-2000°fH, 0-8000mg/L (Ca2+), 0~19999mg/L (CaCO3)
Water hardness measurement accuracy	±1% F.S
Water hardness measurement resolution	0.001/0.01/0.1/1
Water hardness calibration points	2 to 5 points
Water hardness calibration solutions	0.01/0.1/1/10/100 mmol/L

BOD Meter

BOD Meter LBOD-A10

Determination range

0 to 35 mg/L, 0 to 70 mg/ L, 0 to 350 mg/L, 0 to 700 mg/L (without dilution)

0 to 4000 mg/ L (need to dilute) (subsection measurement)

Measurement error

Less or less than 10 %

Sample container/ bottle quantity

1 to 6

Sample container/ bottle Capacity

1000 ml

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A10

Conductivity	{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 3 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}
Temperature	{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}
Temperature compensation	0 to 100 °C, 32 to 212 ° F, Manual or Automatic
Temperature coefficient	Linear

Portable Conductivity Meter LPCM-A11

Conductivity	{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}
TDS	{"TDS range":"0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS accuracy":"\u00b11 % F.S","TDS factor":"0.01 to 1.00 (Default 0.5)","TDS resolution":"0.01, 0.1, 1"}
Temperature	{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}
Temperature compensation	0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A12

Conductivity	{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}
Salinity	{"Salinity range":"0.00 to 80.00 ppt, 0.00 to 42.00 psu","Salinity accuracy":"\u00b11% F.S","Salinity measurement modes":"Practical Salinity (psu) or Natural Seawater (ppt)","Salinity resolution":"0.01, 0.1, 1"}
Temperature	{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}
Temperature compensation	0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A13

Conductivity	{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}
TDS	{"TDS range":"0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS accuracy":"\u00b11 % F.S","TDS factor":"0.01 to 1.00 (Default 0.5)","TDS resolution":"0.01, 0.1, 1"}
Salinity	{"Salinity range":"0.00 to 80.00 ppt, 0.00 to 42.00 psu","Salinity accuracy":"\u00b11% F.S","Salinity measurement modes":"Practical Salinity (psu) or Natural Seawater (ppt)","Salinity resolution":"0.01, 0.1, 1"}
Resistivity	{"Resistivity range":"0.00 to 20 M\u03a9","Resistivity accuracy":"\u00b11% F.S","Resistivity resolution":"0.01, 0.1, 1"}

Water Activity Meter

Water Activity Meter LWTM-A10

Range	0 to 1.0 aw
Resolution	0 to 1.0 aw
Accuracy	± 0.02 aw
Sensor	Nonconductive humidity sensor

Water Activity Meter with sensor LWAM-A10

Measuring range	Water activity 0 to 0.980 aw (no condensing )
Temperature range	0 to 50°C
Measurement accuracy	± 0.015 aw
Temperature accuracy	± 0.5°C

Portable Chlorine Meter LPCL-A10

Benchtop pH Meter LBPM-B11

Benchtop pH meter LBPM-A11

Benchtop pH meter LBPM-A20

Benchtop pH meter LBPM-B10

Benchtop conductivity meter LBCM-A11

Benchtop Conductivity Meter LBCM-A13

Benchtop Conductivity Meter LBCM-A14

Benchtop Dissolved oxygen meter LBDO-A10

Benchtop Dissolved oxygen meter LBDO-A11

Benchtop Ion meter for Cl, LBIM-A10

Benchtop Ion meter for F, LBIM-A11

Benchtop Ion meter for Na, LBIM-A12

Benchtop Ion meter for Ca, LBIM-A13

Benchtop Ion meter for Br, LBIM-A14

Benchtop Ion meter for NH4, LBIM-A15

Benchtop Ion meter for NH3 , LBIM-A20

Benchtop Ion meter for Cn, LBIM-A21

Benchtop Ion meter for Ag, LBIM-A22

Benchtop Ion meter for K, LBIM-A23

Benchtop Ion meter for S, LBIM-A24

Benchtop Ion meter for Pb, LBIM-A25

Benchtop Ion meter for I, LBIM-A26

Benchtop Ion meter for Cu, LBIM-A27

Benchtop Ion meter for Cd, LBIM-A28

Benchtop Water hardness meter LBWM-A10

Pocket Conductivity tester LPCT-A10

Pocket Conductivity tester LPCT-A11

Pocket Conductivity tester LPCT-A12

Pocket Dissolved oxygen tester LPKDO-A10

Pocket ORP tester LPOT-A10

Pocket ORP tester LPOT-A11

Pocket pH tester LPPT-A10

Pocket pH tester LPPT-A11

Pocket pH tester LPPT-A12

Pocket pH tester LPPT-A21

Pocket pH tester LPPT-A22

Pocket pH tester LPPT-A30

Pocket pH tester LPPT-A31

Pocket pH tester LPPT-A32

Multi purpose Pocket pH tester LPPT-B10

Pocket pH tester LPPT-A20

Pocket Salinity tester LPST-A10

Pocket Salinity tester LPST-A11

Pocket TDS tester LPTS-A10

Pocket TDS tester LPTS-A11

Pocket TDS tester LPTS-A12

Multi-range pocket TDS tester LPTS-A20

Portable Dissolved oxygen meter LPRDO-A10

Portable dissolved oxygen meter LPRDO-A11

Portable Multi-parameter Water Quality Meter LMPWM-A10

Portable Multi-parameter Water Quality Meter LMPWM-A11

Portable Multi-parameter Water Quality Meter LMPWM-A20

Portable Multi-parameter Water Quality Meter LMPWM-A21

Portable pH meter LPRPM-A10

Portable pH/ORP meter LPRPM-A11

Portable water hardness meter LPWM-A10

Multi parameter water quality analyzer LMWA-A10

Multi parameter water quality analyzer LMWA-A11

Portable turbidity meter LTM-A16

Portable Turbidity Meter LTM-A10

Portable Turbidity Meter LTM-A11

Portable Turbidity Meter LTM-A12

Portable Turbidity Meter LTM-A13

Portable Turbidity Meter LTM-A14

Portable Turbidity Meter LTM-A15

Bench top Turbidity Meter LTM-B10

Bench top Turbidity Meter LTM-B11

Bench top Turbidity Meter LTM-B12

Bench top Turbidity Meter LTM-B13

Bench top Turbidity Meter LTM-B14

Bench top Turbidity Meter (with built-in printer) LTM-C10

Bench top Turbidity Meter (with built-in printer) LTM-C11

Bench top Turbidity Meter (with built-in printer) LTM-C12

Bench top Turbidity Meter (with built-in printer) LTM-C13

Bench top Turbidity Meter (with built-in printer) LTM-C14

Bench top Turbidity Meter (with built-in printer) LTM-C15

Online pH Controller LOPC-A10

Online Dissolved Oxygen Controller LODC-A10

Online Conductivity Controller LOCC-A10

Benchtop Ion meter for NH₄, LBIM-A15

Benchtop Ion meter for NH₃ , LBIM-A20