Ask An Expert
| Preliminary test force: | 98 N |
| Total test force: | 588, 980, 1471 N |
| Total test force dwell time: | 0 to 30 S |
| Hardness indication: | Analogue display |
| Preliminary test force: | 98 N |
| Total test force: | 588, 980, 1471 N |
| Total test force dwell time: | 1 to 30 S |
| Hardness indication: | Digital display |
| Preliminary test force: | 98 N |
| Total test force: | 588, 980, 1471 N |
| Brinell hardness test: | 306, 613, 1839 N |
| Vickers hardness test: | 294, 588, 980 N |
| Test force: | 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N |
| Hardness value symbol: | HV1, HV5, HV10, HV20, HV30, HV250 |
| Error range in display: | ± 3.0 %, ± 2.0 % |
| Hardness indication: | Digital display |
| Test force: | 612.5 N, 980 N, 1225 N |
| Brinell hardness test: | 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N |
| Hardness measuring area: | 8 to 650 HBW (hard metals steel ball) |
| Hardness indication: | Digital display |
| Frequency (continually adjustable): | 10 Hz to1280 Hz + 0.01 % |
| Amplitude acceleration ( at 30m/s2 pk ): | 40 Hz to 320 Hz + 0.3 dB + 1 digit |
| Amplitude velocity ( at 25mm / sec pk ): | 40 Hz to 320 Hz + 0.5dB +1 digit |
| Amplitude displacement ( at 50 μm pk-pk ): | 40 Hz to 320 Hz + 0.5 dB + 1 digit |
| Test angle: | 60° |
| Gloss aperture: | 2 × 3 mm |
| Measurement range: | 0 to 1000 GU |
| Repeatability: | 0.2 GU (0 to 100 GU), 0.2 % GU (100 to 1000 GU) |
| Sample (size) length: | Diameter ≥30 mm, Thickness ≤ 40 mm |
| Measurement mode: | Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b |
| Stability: | ≤ 0.1 within 30 min |
| Accuracy: | Chromaticity co-ordinate 0.0001 |
| Sample (size) length: | Diameter ≥30 mm, Thickness ≤ 40 mm |
| System: | D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm |
| Light source: | D65 as illuminating source |
| Zero drift: | ≤ 0.1 % |
| Sample (size) length: | 38×70 mm |
| Measuring range: | (1-500) mN.m (divided into 7 small ranges) |
| Indication error: | 0.02 |
| Test speed: | (200° ± 20°)/ min |
| Sample (size) length: | 90 to 200 mm |
| Sample width: | 15 mm, 25 mm, 50mm |
| Measuring range: | 0 to 30, 0 to 100 N,0 to 300 N |
| Accuracy: | ± 1 % |
| Sample (size) length: | 180 mm (180, 150, 100, 90, 50 mm adjustable) |
| Sample width: | 15 mm |
| Measuring range: | 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N |
| Accuracy: | ± 1 % |
| Sample (size) length: | 0 to 200 mm adjustable |
| Sample width: | 15 mm |
| Measuring range: | 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N |
| Accuracy: | ± 1 % |
| Measurement range: | 0 to 100° SR |
| Sealed testing speed: | 100 ± 10 mm/s |
| Volume of distilled water: | 1000 ± 5 ml |
| Draining time: | 149 ± 1 s |
| Measurement range: | 0 to 200 mm |
| Specimen size: | 15×250 mm |
| Division value: | 1 mm |
| Number of specimen holders: | 5 |
| Metal Cylinder inner area: | (100 ± 0.2) cm2 |
| Metal Cylinder height: | 50 mm |
| Metal roller width: | (200 ± 0..5) mm |
| Metal roller weight: | (10 ± 0.5) kg |
| Sample diameter: | 125 mm |
| Sample error: | ± 0.2 mm |
| Sample Thickness: | 0.1 to 1.0 mm |
| Dimension: | 240×288×435 mm |
| Measurement range: | 0.01 to 10 N |
| Slider weight: | 200 g |
| Slider size: | 63×63 mm |
| Testing accuracy: | ± 2 % |
| Testing speed: | 200° ± 20° / min |
| Test range: | 1 to 10000 mN |
| Indicating Error: | ± 1 % |
| Testing length: | 5, 10, 15, 20, 25, 50 mm |
| Measuring range: | 0 to 4 mm |
| Accuracy: | 0.01 or 0.001 mm |
| Gauge: | Analogue gauge display |
| Contact pressure (to create false weight): | 100 ± 10 kPa |
| Measuring range: | 0 to 20 mm |
| Accuracy: | 0.01 mm |
| Gauge: | Analogue gauge display |
| Contact pressure (to create false weight): | 20 ± 0.5 kPa |
| Sample size (L*B): | 230×50 mm (can join short samples together) |
| Rub pressure: | 20 ± 0.2 N |
| Friction speed: | 43 times / min |
| Friction area (L*B): | 155×50 mm |
| Sample width: | 15 mm |
| Sample maximum length: | 300 mm |
| Parallelism: | ≤ 0.1 mm |
| Dimension: | 240×520×70 mm |
| Measuring range: | 10 to 1000 mN |
| Division value: | 1 mN |
| Accuracy: | ± 1% |
| Indicating Error: | ≤ 0.5 |
| Measuring range: | 0.1 to 10 kN |
| Indication error: | < ± 1% |
| Platen Size: | 500×500 mm (customized) |
| Operating stroke: | 500 mm (customized) |
| Measuring range: | 1 to 50 kN |
| Indication error: | < ± 1% |
| Platen Size: | 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized) |
| Operating stroke: | 800 mm/ 1000 mm/ 1200 mm/ 1500 mm (customized) |
| Measuring range: | 0 to 1000 ml/min |
| Test area: | 10 ± 0.02 cm2 |
| Area differential pressure: | 1 ± 0.01 kPa |
| Inner diameter of grip ring: | 35.68 ± 0.05 mm |
| Capacity: | A: 20 to 500 J/m2 B: 500 to 1000 J/m2 |
| Impact angle: | 90° |
| Unit: | Lb-ft/in2 J/m2 |
| Error: | A: ± 1 J/m2 B: ± 2 J/m2 |
| Measuring range: |
A (1 to 6) J indicating error ± 0.05 J B (1 to 12) J indicating error ± 0.05 J C (1 to 24) J indicating error ± 0.05 J D (1 to 48) J indicating error ± 0.05 J The indicating errors w.r.t measurement range of 20 to 80 % |
| Frictional resistance: | <0.25 J |
| Pyramid dimension: | Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm |
| Dimension: | 800×470×840 mm |
| Measuring range: | 0 to 1000 mN |
| Resolution: | 0.1 mN |
| Indication error: | ± 1 % |
| Tearing arm: | 104 ± 1 mm |
| Capacity: | 10 -16000 mN |
| Resolution: | 0.1 mN |
| Tearing arm: | 104 ± 1 mm |
| Tearing angle: | 27.5° ± 5° |
| Measurement range: | 0 to 5600 kPa |
| Accuracy: | ± 0.5 % F.S. |
| Compression speed: | 170 ± 15 ml/min |
| Clamp pressure: | ≥ 690 kPa |
| Measurement range: | 0 to 1600 kPa |
| Accuracy: | ± 0.5 % F.S. |
| Compression speed: | 95 ± 5 ml/min |
| Clamp pressure: | ≥ 430 kPa |
| Measurement range: | 5 to 500 N, 50 to 3000 N |
| Resolution: | 1 N |
| Accuracy: | ± 1 % |
| Variability: | ≤ 1 % |
| Measuring scope: | ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s) |
| Accuracy: | ±0.1 s within 300 s |
| Vacuum system volume (ml): |
Bigger volume: 380 ± 1 Smaller volume: 38 ± 1 |
| Contact pressure: | 100 ± 2 kPa |
| Measuring scope: | 0 to 99999 s |
| Folding angle: | 135° ± 2° |
| Tensile scope: | 4.9 to 14.7 N |
| Folding head suture size: | 0.25 mm, 0.50 mm, 0.75 mm, 1.00 mm |
| The maximum temperature: | 300°C |
| Temperature fluctuation: | Within ± 0.5°C |
| Temperature uniformity: | Within ± 1°C |
| Rotate speed of the turntable: | 11 r/min to 12r/min, turntable dimension diameter: 285 mm |
| Vacuum degree: | 0 to 90 KPa |
| Accuracy: | 1 % FS |
| Resolution: | 0.1 KPa |
| Vacuum chamber effective size: | 270 × 210 mm |
| Resolution: | 0.1 % O2 |
| Measuring range: | 0 to 100 % O2 |
| Precision: | ± 0.4 % O2 |
| Response time: | < 10 S |
| Temperature range: | 10 to 35°C |
| Maximum falling height: | 2000 mm |
| Resolution of displacement: | 1 mm |
| Height error: | < ± 2 mm |
| Impact Speed & Energy (charpy): | 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J |
| Impact energy (Izod): | 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J |
| Resolution of impact energy: | 0.001 J |
| Pendulum up angle: | 160° |
| Seal temperature: | Room temperature -250°C |
| Control accuracy: | ± 0.2°C |
| Dwell time: | 0.1 S to 999.9 S |
| Dwell pressure: | 0.05 to 0.7 MPa |
| Standard roller: | 2000 ± 50 g |
| Testing stations: | 3 |
| Dimension (L*W*H) tester: | 320×210×550 mm (3 stations) |
| Weight for stations: | 10 kg (3 stations) |
| Standard roller: | 2000 ± 50 g |
| Testing stations: | 6 |
| Dimension (L*W*H) tester: | 650×210×550 mm (6 stations) |
| Weight for stations: | 15 kg (6 stations) |
| Measuring range: | 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density) |
| Measuring rate: | 0.001 S |
| Temperature range: | 50 to 400°C |
| Temperature precision: | ± 0.5°C |
| Measuring range: | 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density) |
| Measuring rate: | 0.001 S |
| Temperature range: | 50 to 400°C |
| Temperature precision: | ± 0.5°C |
| Inclined adjustable angle: | 0 to 40° |
| Panel width: | 120 mm |
| Test area width: | 80 mm |
| Standard steel balls: | 1/32 to 1 inch |
| Operating temperature: | Ambient temperature to 300°C |
| Heating rate: | 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min) |
| Maximum temp. error with heating speed: | ± 5°C under 50°C/ h, ± 1°C under 120°C/ h |
| Range of deformation: | 0 to 10 mm |
| Temperature control range: | Room temperature to -70 ℃ (room temperature ≤ 25 ℃） |
| Temperature accuracy: | ± 0.3 ℃ |
| Impact speed: | 0℃ to -30℃ around 2.5 ℃/min -30℃ to -40℃ around 2.5 ℃/min -40℃ to -70℃ around 2.0 ℃/min |
| Max dimension L × W × H: | 910 × 510 × 860 mm |
| Mixed capacity: | 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg |
| Temperature range: | RT to 300°C |
| Temperature control system: | PID control |
| Display: | LED display |
| Test arm weight: | 2.5 N |
| Additional Loads: | 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N, |
| Idler: | 150 mm |
| Abrasion stroke: | 40 ± 0.2 M |
| Control temperature range: | Normal temperature to 200°C |
| Temperature display resolution: | 0.01°C |
| Temperature control accuracy: | ± 0.3° |
| Calibration accuracy: | Mooney value ± 0.5 |
| Temperature tester: | Room temperature to 200°C |
| Temperature display resolution: | 0.1°C |
| Temperature control accuracy: | ≤ ± 0.3°C |
| Rotor speed: | 100 times/ min |
| Temperature range: | -60°C to 0°C |
| Temperature accuracy: | ± 0.5°C |
| Impact speed: | 2 m/s ± 0.2 m/s |
| Temperature fluctuation: | <± 0.5°C |
| Temperature range: | RT 50° to 300° |
| Temperature accuracy: | ± 1° |
| Measuring range: | 0.01 to 25 mm |
| Accuracy: | ± 0.01 mm |
| Measuring range: | 0.001 to 9999 |
| Stability: | A (absorbency of light) <0.003 within 3 mins |
| Linearity error: | <3.0 % |
| Repeatability error: | A (absorbency of light) <0.005 |
| Measuring range: | 0.001 to 9999 |
| Stability: | A (absorbency of light) <0.003 within 3 mins |
| Linearity error: | <3.0 % |
| Repeatability error: | A (absorbency of light) <0.005 |
| Salinity Measurement range: | 0.00 to 19.99 ms/cm |
| Measuring accuracy: | EC ± 2% full scale |
| Temperature Measurement range: | -5 to 50°C |
| Temperature accuracy: | ± 0.5°C |
| Measuring range: | 0 to 100 kPa |
| Resolution: | 0.01 kPa |
| Accuracy: | ± 1 kPa |
| Soil temperature measuring range: | -55 to 105°C |
| Maximum load: | 100 kg ( kg and N can be switched automatically) |
| Resolution: | 0.01 g |
| Accuracy: | ± 0.5 % |
| Measuring depth: | 0 to 40 mm |
| Maximum load: | 100 kg ( kg and N can be switched automatically) |
| Resolution: | 0.01 g |
| Accuracy: | ± 0.5 % |
| Measuring depth: | 0 to 450 mm |
| Measurement range: | 0 to 80 % |
| Resolution: | 0.1 |
| Accuracy: | ± 2 % n (non-saturation condition) |
| Needle: | 280 mm |
| Measurement range: | 0 to 90 % |
| Resolution: | 0.1 or 0.01 |
| Accuracy: | ± 5 % n (non-saturation condition) |
| Needle: | 235 mm |
| Measurement range: | 0 to 60 % |
| Resolution: | 0.1 |
| Accuracy: | ± 5 % n (non-saturation condition) |
| Needle: | 280 mm |