Ask An Expert
Autosampler for TOC Analyzer LATA-A10 is specifically designed to make the analytical experiments effortless and simpler. It can hold up to 19 different samples and the software makes the monitoring fully automatic. During injection the motion of the components are also monitored. For every motion there is a defined time window and a mechanical range which is decided by the processor. A fault message is displayed on the computer if any step was not carried out properly.
This autosampler is used to save time taken in TOC analysis of many samples, to make the operations less laborious and also to deliver reliable results.
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |
| Maximum number of Sample | 19 |
| Injection arm stroke | 85 mm |
| Ambient temperature | 0 to 40°C |
| Relative humidity | ≤ 85 % |