Ask An Expert
Angular Spectrometer LASM-A10 is a tabletop unit, offers angle measurement accuracy of 1 inch and diopter compensation range of ≥ ± 5 diopters. Incorporated with two verniers at the opposite edges, to remove errors induced by the off center errors of the divided circle and thrusting bearing under the divided circle for smooth rotation. Equipped with magnifier with handle, optical parallel plate and planar holographic grating. Built in with adjustable dioptre, moveable telescopes eyepiece and adjustable stage.
Angular Spectrometer is widely used for angular measurements based on polarization, diffraction, refraction and interference. It is commonly used in color measurements, concentration determination of chemical components and electromagnetic radiation analysis.
| Spectral Range | 7800 cm-1 to 350 cm-1 |
| Resolution | 0.85 cm-1 |
| Wave number precision | ± 0.01 cm-1 |
| Scanning speed | Microprocessor control, different scanning speed selectable |
| Beam Configuration | Dual Channel |
| Elements ( Measuring Range ) | {"As, Se, Pb, Bi, Sb, Te, Sn":"< 0.01 \u00b5g\/L","Hg, Cd":"< 0.001 \u00b5g\/L","Zn":"< 1.0 \u00b5g\/L","Ge":"< 0.1 \u00b5g\/L"} |
| Precision ( RSD ) | < 1.0 |
| Linear range | More than 3 orders of magnitude |
| Wavelength range ( 3600 lines / mm ) | 180 to 500 nm |
| Wavelength range ( 2400 lines / mm ) | 180 to 800 nm |
| Temperature | 20 ~ 28 °C |
| Elements per minute | 26 elements |
| Monochromator Specifications | {"Optical type":"Czerny turner","Resolution":"\u2264 0.015nm (3600 line grating) |
| Solid State Power Specifications | {"Frequency":"27.12 MHz |
| Technical Specifications | {"Suitable sample content range":"Liquid sample: 0.01 ppm to several thousand ppm |
| Control Circuit | {"Photomultiplier tube specification":"R212 \/ R928","Negative high voltage":"-50 to -1000 V","Circuit measuring range":"(10-12<\/sup> to 10 -4<\/sup>) A","Signal acquisition":"VF conversion"} |
| Wavelength range | 180 to 900 nm |
| Elements per minute | 15 elements |
| Temperature | 29 °C |
| Incident slit | 25 µm |
| Wavelength range | 195 to 800 mm |
| Elements per minute | 10 elements |
| Temperature range | 32 °C |
| Incident slit | 20 µm |
| Measureable elements | S to U |
| Detection limit | 1 ppm |
| Temperature | 15 ~ 30 °C |
| Elemental content | 1 ppm to 99 % |
| Analytical Method | Energy dispersive X-ray fluorescence analytical Method |
| Elements Measuring | Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured |
| Range | Simultaneous detector |
| Content measurement range | ppm to 100% |
| Analytical Method | Energy dispersive X-ray fluorescence analytical Method |
| Elements Measuring | Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured |
| Range | Simultaneous detector |
| Content measurement range | ppm to 99.99% |
| X-ray Tuble | Glass tube, Ceramic tube, Ripple Ceramic tube: Cu, Fe, Co, Cr, Mo etc., Power 2 kW |
| Focus Size | 1 × 10 mm/ 0.4 × 14 mm/ 2 × 12 mm |
| Stability | ≤ 0.01 % |
| Tube Current | 5 to 80 mA |