XRF-Spectrometer LXRF-A10

XRF-Spectrometer LXRF-A10 is a microprocessor controlled high-count throughput unit with low detection limits for wide range of elements. Provision of multi-elemental analysis with detection limits upto 1 ppm. Built-in movable platform for easy location of testing point.High resolution detector improves analysis accuracy. Equipped with safety features of optical tube shielding with no X-ray radiation and high voltage emergency locking.

Measureable elements	S to U
Detection limit	1 ppm
Temperature	15 ~ 30 °C
Elemental content	1 ppm to 99 %
Repeatability	0.001
Stability	0.001
Power supply	AC 220 V ± 5 V
Dimensions	550 x 410 x 320 mm
Weight	45 kg

Detection limit – 1 ppm
Measureable elements – S to U
Elemental content – 1 ppm to 99 %
Movable sample platform for easy detection of testing point
Built-in electric cooling Si-PIN detector
Safety features - optical tube shielding with no X-ray radiation and high voltage emergency locking

Used in detection of plating thickness of metals, concentration of plating solution , RoHS detection and analysis, full-element analysis and electro plating industries

XRF-Spectrometer LXRF-A10

Related to XRF Spectrometer

Handheld XRF Spectrometer LXRF-B10

Analytical Method	Energy dispersive X-ray fluorescence analytical Method
Elements Measuring	Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
Range	Simultaneous detector
Content measurement range	ppm to 100%

Handheld XRF Spectrometer LXRF-B11

Analytical Method	Energy dispersive X-ray fluorescence analytical Method
Elements Measuring	Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
Range	Simultaneous detector
Content measurement range	ppm to 99.99%

FTIR Spectrometer

FTIR Spectrometer LIR-B10

Spectral Range	7800 cm^-1 to 350 cm^-1
Resolution	0.85 cm^-1
Wave number precision	± 0.01 cm^-1
Scanning speed	Microprocessor control, different scanning speed selectable

Atomic Fluorescence Spectrometer

Atomic Fluorescence Spectrometer LAFS-A10

Beam Configuration	Dual Channel
Elements ( Measuring Range )	{"As, Se, Pb, Bi, Sb, Te, Sn":"< 0.01 \u00b5g\/L","Hg, Cd":"< 0.001 \u00b5g\/L","Zn":"< 1.0 \u00b5g\/L","Ge":"< 0.1 \u00b5g\/L"}
Precision ( RSD )	< 1.0
Linear range	More than 3 orders of magnitude

ICP Spectrometer

ICP spectrometer LICP-A10

Wavelength range ( 3600 lines / mm )	180 to 500 nm
Wavelength range ( 2400 lines / mm )	180 to 800 nm
Temperature	20 ~ 28 °C
Elements per minute	26 elements

ICP Spectrometer LICP-B10

Monochromator Specifications	{"Optical type":"Czerny turner","Resolution":"\u2264 0.015nm (3600 line grating) \u2264 0.030nm (2400 line grating)","Focal length":"1000 mm","Grating specifications":"huge holographic grating with 3600 L\/mil or 2400 L\/mil and 80 mm \u00d7 100 mm of ruling area","Wavelength range":"195 to 500 nm for 3600 line grating 195 to 800 nm for 2400 line grating"}
Solid State Power Specifications	{"Frequency":"27.12 MHz Frequency stability: < 0.05%","Spray chamber":"Scott double pass spray chamber","Output power":"800 W to 1600 W, adjustable with power efficiency more than 65%","Output power stability":"\u2264 0.05%","Induction coil":"25 mm \u00d7 3 ID (ID-internal diameter), equipped with three concentric quartz torch tubes 35 mm ED (ED-external diameter)"}
Technical Specifications	{"Suitable sample content range":"Liquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%","Repeatability":"short-term stability- RSD \u2264 1.5% Long-term stability: RSD \u2264 2%","Test speed":"5 to 8 elements \/ min","Limits of detection (LOD, \u00b5g\/L) for most elements":"1ppb to 10ppb"}
Control Circuit	{"Photomultiplier tube specification":"R212 \/ R928","Negative high voltage":"-50 to -1000 V","Circuit measuring range":"(10^{-12<\/sup> to 10 ^{-4<\/sup>) A","Signal acquisition":"VF conversion"}}}

ICP Spectrometer LICP-A11

Wavelength range	180 to 900 nm
Elements per minute	15 elements
Temperature	29 °C
Incident slit	25 µm

ICP Spectrometer LICP-A12

Wavelength range	195 to 800 mm
Elements per minute	10 elements
Temperature range	32 °C
Incident slit	20 µm

XRD Diffractometer

$XRD Diffractometer LXRD-A10$

XRD Diffractometer LXRD-A10

X-ray Tuble	Glass tube, Ceramic tube, Ripple Ceramic tube: Cu, Fe, Co, Cr, Mo etc., Power 2 kW
Focus Size	1 × 10 mm/ 0.4 × 14 mm/ 2 × 12 mm
Stability	≤ 0.01 %
Tube Current	5 to 80 mA

Angular Spectrometer

Angular Spectrometer LASM-A10

Angle Measurement Accuracy	1inch
Optical Parameter	{"Focal Length":"170 mm","Effective Aperture":"\u03a6 22 mm","Field of View":"3\u00b0 22inch","Focal Length of Telescope\u2019s Eyepiece":"24.3 mm","Maximum Length Between Collimator and Telescope":"120 mm","Slit Width":"0.02 to 2 mm","Diopter Compensation Range":"\u2265 \u00b1 5 diopters"}
Divided Circle	{"Diameter":"\u03a6178 mm","Circle Graduation":"0\u00b0 to 360\u00b0","Division":"0.5\u00b0","Vernier Reading Value":"1inch"}
Stage	{"Diameter":"\u03a670 mm","Rotating Range":"360\u00b0","Range of Vertical Adjustment":"20 mm"}